System Settings - VDO MS 3000 User Manual

SYSTEM SETTINGS

System settings
To adjust the navigation system to your own preferences you can modify
various settings.
Select "
:
The "
The following options are available:
Car position
This option enters the car position input menu.
Car position input is only required if the
navigation system is unable to relocate itself.
Display
To rotate the display contents 180 degrees for over-head mounting of the
display.
Volume
To adjust the volume level of voice messages and to switch off audible
guidance advice.
Route selection
To select criteria which influence the route planning.
Traffic info
To enable/disable dynamic guidance and to select the TMC traffic information
used for dynamic guidance.
Language
To load languages for acoustical advice and menu text from a separate
language CD.
Measuring units
To select the measuring units for the displayed distances.
Date / Time
To set the time and date format and to adjust the offset for different time
zones.
SDVC Mode
To adjust the speed dependent volume control.
System information
To get information on the hardware and software versions of the set
(important in case of service).
Service
Code protected menu for diagnostic purposes.
Return
To return to the main menu.
32
" from the main menu.
" menu is shown.
(only with TMC extension connected)