Dynamic Guidance With Tmc - VDO MS 3000 User Manual

DYNAMIC GUIDANCE WITH TMC*

Dynamic guidance with TMC
With the RDS-TMC (Traffic Message Channel) the actual traffic situation on
your route is taken into consideration for guidance. So you will be informed
about all traffic obstructions covered by TMC and occuring on your route
ahead.
When you get closer to the obstruction the "Detour" option becomes active
and the navigation system plans a detour if you wish to take it.
TMC is not yet implemented in all countries and is not supported by all RDS
broadcasters.
To ensure dynamic guidance with TMC the inserted map CD has to support the
TMC function. We recommend to always use of the latest map CDs.
TMC voice messages
If TMC information is received, all TMC announcements ahead on your route
will be announced by voice messages.
Repeating a TMC voice message
Push the REP key on the remote control.
or:
select "Repeat" in the guidance screen.
:
You hear the actual guidance advice and the latest TMC announcement.
TMC traffic information in the guidance screen
If a traffic obstruction is ahead on your route,
this obstruction will be announced by
information in the top line of the guidance
screen.
When you are far away from the obstruction,
the distance to the obstruction and the type of
the obstruction are shown.
You can find details of the obstruction in
info screen i6 "Traffic info".
As soon as you move closer to the obstruction,
the detour option becomes active. The cursor
then automatically jumps into the top line of
the guidance screen.
* only with TMC extension connected
26