Switching On / Off; Stand-By Mode; Volume - VDO MS 3000 User Manual

CONTROLS

Switching on / off

The navigation system is switched on / off together with the ignition.
Switch on the ignition.
:
As soon as the navigation system is operable, an advice on the use of the
system appears on the display.
Read and confirm this advice by pressing OK on the remote control.
:
The "
After a few seconds the system is initialized and you can select the navigation
functions (options in highlighted letters).

Stand-by mode

If you do not wish to hear guidance advice, you can set the navigation system
to its stand-by mode.
Select "
:
The display is switched off and audible guidance advice is muted.
Press one of the cursor keys 4, 6, 8, 2 or the OK key on the remote
control to resume normal operation.
If the navigation system was switched off in stand-by mode, it restarts in stand-
by mode when turning the ignition on again.

Volume

You can adjust the volume of the audible guidance advice as follows:
Push the + key once or more than once to increase the volume of the
voice messages.
Push the - key once or more than once to decrease the volume of the
voice messages.
:
The adjusted volume is announced.
12
" menu appears.
" from the main control menu.