LaCie 2big Dock Manual

Ports

Quick Start

1. Connect power cable
   
2. Connect Thunderbolt cable
   

Your computer must be connected to the host port to power on and access 2big Dock.

The included Thunderbolt cable can be used to connect 2big Dock to USB-C host ports that support Thunderbolt or USB.

3. Install Toolkit
   Launch Start Here from your drive to register LaCie 2big Dock and download the Toolkit software installer.
   LaCie 2big Dock is configured RAID 0 for full storage capacity and formatted exFAT for compatibility with macOS and Windows. Install Toolkit to help you configure the drives for performance or protection. You can also use Toolkit to easily sync between your computer and 2big Dock, archive previous versions of files, and much more.
   Mac: For Time Machine, 2big Dock must be reformatted for Mac. Reformatting will delete all data previously stored on the drive.
   

To request warranty service, contact an authorized LaCie service center or refer to www.lacie.com/support/2big-dock for more information regarding customer support within your jurisdiction.

Documents / Resources

References

• LaCie Storage Solutions: External Hard Drives, SSDs, and RAID Systems | Seagate US

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download LaCie 2big Dock Manual