WARNING: Do not transport your grill while in use or while the grill is hot. Ensure the fire is completely out and that the grill is completely cool to the touch before moving. PIT BOSS® GRILLS WWW.PITBOSS-GRILLS.COM WWW.PITBOSS-GRILLS.COM...
Easily remove from even heat distribution. Keep clean. G SMOKE the undercarriage spout. This preset temperature operates the grill at the lowest temperature, without the fire going out. PIT BOSS® GRILLS WWW.PITBOSS-GRILLS.COM WWW.PITBOSS-GRILLS.COM PIT BOSS® GRILLS...
REGULAR USE All Pit Boss® units should keep a minimum clearance of 305mm (12 inches) from combustible constructions and this clearance Smoking and grilling styles of cooking can give you different results must be maintained while the grill is operational.
Page 6
63°C / 145°F Snapshot this chart Salmon (whole) 95°C / 200°F 2-3 HR 63°C / 145°F for reference. You Lobster 95°C / 200°F 2-3 HR 63°C / 145°F can thank us later! PIT BOSS® GRILLS WWW.PITBOSS-GRILLS.COM WWW.PITBOSS-GRILLS.COM PIT BOSS® GRILLS...
Close the grill lid. Turn the Temperature Control Dial to your desired temperature and start grilling! (G) GET TOOLS OF THE TRADE Explore a variety of grilling accessories available from our online store for all cooking levels. PIT BOSS® GRILLS WWW.PITBOSS-GRILLS.COM WWW.PITBOSS-GRILLS.COM PIT BOSS® GRILLS...
• The hopper includes a clean-out feature to allow for ease of clean- Any Pit Boss® unit will give you many years of flavorful service with ing and change out of pellet fuel flavors. To empty, locate the plate minimum cleaning. Follow these tips to service your grill: and the cover of the drop chute on the back side of the hopper.
Proper cleaning, maintenance and the use of clean, dry, quality fuel will prevent common operational problems. When contact Customer Care. your Pit Boss® grill is operating poorly, or on a less frequent basis, the following troubleshooting tips may be helpful. "Err" error code Grill probe wire not making Remove the access panel and check for any damage to the Grill Probe wires.
• to damages or defects caused by service or repair of the product by an unauthorized dealer of Pit Boss®. BURN POT During the term of the warranty, the Dansons obliges to furnishing a replacement for defective and/or failed compo- nents and will not charge for repair or replacement for parts returned, freight prepaid, should the part(s) are found to be defective upon examination.
Need help?
Do you have a question about the PB500FB1 and is the answer not in the manual?
Questions and answers