Specifications - Aiwa XR-MS3 Operating Instructions Manual

SPECIFICATIONS

Main unit
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Input
Outputs
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
General
Power requirements
Power consumption
Standby power consumption 1.9 W (power-economizing mode
Dimensions of main unit (W
Weight of main unit
22
ENGLISH
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 µV/m
Loop antenna
10 W + 10 W
(50 Hz to 20 kHz, THD less than
1%, 6 ohms)
15 W + 15 W
(1 kHz, THD 10%, 6 ohms)
0.15% (6W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 500mV
SPEAKERS: accept speakers of 6
ohms or more
PHONES (stereo mini jack):
accepts headphones of 16 ohms
or more
DIGITAL OUT (OPTICAL) jack
Semiconductor laser ( = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
4 tracks, 2 channels stereo
CrO tape: 50 Hz to 16000 Hz
2
Normal tape: 50 Hz to 15000 Hz
60 dB (Dolby B NR ON, CrO
peak level)
AC bias
Recording/playback head
erase head 1
120 V AC, 60 Hz
45 W
set to ON)
H D)
100 210.6 271.5 mm
(4 8 3 / 10 3 / in.)
8 4
3.8 kg (8 lb 6 oz.)
Speaker system
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W
Weight
Specifications and external appearance are subject to change without
notice.
• US AND FOREIGN PATENTS LICENSED FROM DOLBY
LABORATORIES LICENSING CORPORATION.
The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound Inc.
Under licence from BBE Sound Inc.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol h are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
tape
instructions, may cause har mful interference to radio
2
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
1,
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
2 way, bass reflex (magnetic
shielded type)
Woofer:
85 mm
Tweeter:
22 mm dome type
6 ohms
86 dB/W/m
H D) 100 206 188 mm
(4 8 1 / 7 1 /
8 2
1.5 kg (3 lb 5 oz.)
in.)