Aiwa XR-MS3 Operating Instructions Manual page 12

DISPLAY
To change the display in playback mode
Press DISPLAY on the main unit, or press DISPLAY while
pressing SHIFT on the remote control.
The display changes in the following order:
1 Level indicator
2 Tape counter
(Example: TAPE 0185)
12
ENGLISH
DISPLAY
SHIFT
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
Type II tape
detection slot
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to
cover the Type II tape detection slot.)
• 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
• Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the unit.
DOLBY NR system
The Dolby Noise Reduction system reduces tape hiss noise.
For optimum performance when playing back a tape
recorded with the DOLBY NR system, turn on the DOLBY
NR system.
Tab for
side A