Page 1
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means - electronic, mechanical, photocopying, recording, or otherwise - without prior written permission of Safety- Kleen Systems, Inc. Safety-Kleen Systems, Inc. 2600 North Central Expressway, Suite 200 Richardson, TX 75080...
ABLE OF ONTENTS Safety Measures ............................1 Air Quality and Environmental Information ....................2 The Solvent ..............................3 Safety-Kleen M81 Agitation Parts Washer ....................3 Specifications ..............................5 Operation............................... 6 Soaking Parts ............................ 7 Agitating Parts ........................... 7 Inspecting Parts ..........................7 Removing Parts ..........................
CAN/CSA C22.2 No. 68 : The Standard for Motor Operated Appliances Important Safety Instructions 1. Read and understand the Operator’s Booklet for this Safety-Kleen equipment before operating. Use only as described in this booklet. Use only manufacturer’s supplied attachments. 2. Consult the Safety Data Sheet (SDS) for the cleaning fluid used in this equipment. The SDS provides detailed information regarding the cleaning fluid’s health hazards, first aid, shipping, storage,...
Consult the SDS for further clean-up measures. Contact your Safety-Kleen Representative. 21. Do not replace, modify, or obstruct the fusible link. Do not obstruct or hang anything on the lid. Do not leave unattended objects in the equipment that can interfere with lid closure.
ARTS ASHER The Model 81 is a heavy duty, air-operated parts washer featuring an air-operated lid that rises and lowers hands-free, leaving the operator free to perform other tasks. The unit also includes a mobile platform that, to enhance cleaning, lifts and lowers and agitates at adjustable speeds which helps to “scrub”...
AQMD and/or the State agency. Do not remove the work tray from the equipment. The Model 81 is available in two types of configurations: Type 1 for single lift cylinder and Type 2 for dual lift cylinder. Each of the configurations has a slightly different control panel assembly.
“up” position. connection to the M81.8 is secure. Check the air-lines for kinks or blockages. Contact your Safety-Kleen Representative. Confirm the unit is receiving 80-120 psi. Check that the incoming compressed airline The platform does not lower connection to the M81.8 is secure.
Safety-Kleen equipment be your primary contact with Safety-Kleen put the name and phone number of the nearest Safety-Kleen branch on the equipment and/or on the inside cover of this booklet provide information about your service Safety-Kleen contract ...
Page 12
Safety-Kleen Systems, Inc. 2600 North Central Expressway Richardson, TX 75080 Printed in USA Rev. 2018/02 SK 817046...
Need help?
Do you have a question about the 81 and is the answer not in the manual?
Questions and answers