Related Manuals for safety-kleen MINIMIZER III 710.2
Summary of Contents for safety-kleen MINIMIZER III 710.2
- Page 1 Part No. SK817306 March 2008 ® MODEL 710.2 MINIMIZER III ® MODEL 710.3 MINIMIZER III Operator’s Booklet Safety-Kleen Systems, Inc. 5400 Legacy Drive, Cluster II, B3 Plano, Texas 75024...
-
Page 2: Table Of Contents
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means - electronic, mechanical, photocopying, recording, or otherwise - without prior written permission of Safety-Kleen Systems, Inc. -
Page 3: Introduction
INTRODUCTION Purpose ® Read this entire booklet carefully before you use the Safety-Kleen Minimizer III Currently there are two versions of this product: the Model 710.2 (220V) and Model 710.3 (110V). These units operate identically. For the sake of simplicity, ®... -
Page 4: Description
Safety-Kleen Systems, Inc. DESCRIPTION In dealing with liquid hazardous waste, companies have paid a high cost for disposal and repurchase of new chemicals for their processes. The Safety-Kleen ® Minimizer III reduces these costs. The means of accomplishing this is through a process known as distillation. -
Page 5: Safety Summary
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. SAFETY SUMMARY ® The Minimizer III should provide years of reliable operation. However, like all equipment, this unit can be damaged if operated improperly. Improper use can ® also compromise operator safety. To help ensure safety, the Minimizer III incorporates the following safety features: •... -
Page 6: Controls And Indicators
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. • When cleaning residues from the unit use only non-sparking tools • Do not open lid when unit is operating and the green light is off • Do not use the foot pedal for automatic filling when unit is operating and the green light is off •... -
Page 7: Suction Tube Loading
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. Suction Tube Filling The operator of the unit has the option of filling the unit with dirty solvent manually (by pouring solvent directly into the unit) or by using the fill pump to remove dirty solvent directly from the waste can. -
Page 8: Operating Procedures
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. OPERATING PROCEDURES NOTE: The MSDS contains detailed information regarding the safe use, health hazards, first aid, shipping, handling, storage, emergency and environmental information. ® This section covers the safe use and operating instructions for the Minimizer III Safe Use Instructions 1. -
Page 9: Loading Unit
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. recess for clamping ring bag behind inlet Figure 4 Figure 5 Filling Unit There are two methods of filling the distillation chamber with solvent: Pump filling and manual filling. Pump Filling 1. -
Page 10: Choosing The Recycling Mode
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. Clamping Ring Vapor outlet Suction Tube Figure 6 Figure 7 Figure 8 Manual Filling 1. Ensure that the green light on the control panel is on. 2. Open the lid. Ensure that a new bag is installed. -
Page 11: Starting A Cycle
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. Mode 2 – DEFAULT MODE This mode is the default setting of the unit and is recommended for normal solvents and contaminants. Mode 3 This mode should be used when the percentage of low boiling point components (e.g. -
Page 12: Aborting A Cycle
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. Aborting a Cycle The process can be aborted at any time by pressing the “STOP” button. The recycler will go into cool down mode and the display will read “Cycle aborted. -
Page 13: Maintenance
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. MAINTENANCE Fill Pump To prevent blockage of the hoses and pump seizure, the fill pump inlet screen and tubing should be rinsed at the end of every filling procedure. 1. Ensure that the green light on the control panel is on. -
Page 14: Troubleshooting
® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. To Fill / Drain the Condenser: 1. Disconnect power. 2. Place a collecting drum with a minimum capacity of 10 gallons (38 L) under the water outlet on the left side of the unit. Or, attach a pipe or hose to the water outlet leading to a drain or collecting drum. -
Page 15: Service And Repair
If any other error code appears, contact qualified technical personnel. SERVICE AND REPAIR ® The Minimizer III is to be serviced by authorized Safety-Kleen personnel. If you have any questions, require repairs, or need early service, call the local Safety- Kleen Branch. Operator's Booklet... - Page 16 ® Model 710.2 / 710.3 Minimizer III Safety-Kleen Systems, Inc. Safety-Kleen Systems, Inc. 5400 Legacy Drive Cluster II, B3 Plano, TX 75024 Rev.12/2008 SK 817306 Operator's Booklet Page 14...
Need help?
Do you have a question about the MINIMIZER III 710.2 and is the answer not in the manual?
Questions and answers