1. Manuals
  2. Brands
  3. HARVEY Manuals
  4. Lathe
  5. T-50
  6. Instruction manual

HARVEY T-50 Instruction Manual

Woodturning lathe
Hide thumbs

Advertisement

Table of Contents

INSTRUCTION MANUAL
Woodturning Lathe
Model: T-50
T-60
Harvey Industries Co.,Ltd
www.harvey.cn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T-50 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HARVEY T-50

Summary of Contents for HARVEY T-50

  • Page 1 INSTRUCTION MANUAL Woodturning Lathe Model: T-50 T-60 Harvey Industries Co.,Ltd www.harvey.cn...
  • Page 2 Dear Woodworker: Thank you for your purchase and welcome to the Harvey group of discriminating woodworkers. I understand that you have a choice of where to purchase your machines and appreciate the confidence you have in our products. Every machine sold by Harvey Industries has been carefully designed and well thought through from a woodworker's perspective.
  • Page 3 Safety Rules As with all machinery there are certain hazards involved with the operation and use. Using it with caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result.
  • Page 4 Limited Warranty New woodworking machines sold by Harvey Industries carry a one-year warranty from the date of shipping. Harvey Industries guarantees all new machines sold to be free of manufacturers’ defective workmanship, parts and materials. We will repair or replace without charge, any parts determined by Harvey Industries Co., Ltd. to be a manufacturer’s defect.
  • Page 5 > Sliding headstock for easy outboard turning > Unique “Swing-away” Extension Bed System (SEB) for easy tailstock storage (Standard for T-60, optional for T-50) > Heavy duty banjo with easy maneuver and secure locking > Cast steel chrome trimmed tool rest >...
  • Page 6 Identifications A ：Motor L：Tailstock B ：Belt Access Door M：Tailstock Hand Wheel C：Headstock N：Tailstock Lock Lever D ：Face Plate O：12” Swing Away Extension Bed (Standard for T-60) E ：Spur Center P：Bed Lock Assy F ：Tool Rest Lock Handle Q：Leg G ：Tool Support R：Bed H：Tool Rest Base S：Tool Rest Base Lock Lever...

  • Page 7: Specifications

    Specifications Models T-50 T-60 Operation Information 20” 24” Swing Over Bed 36” 48” Dist. Between Centers 16” Swing Over Tool Rest Base 20” Spindle Speeds: H 320-3500rpm (Variable) 320-3500rpm(Variable) 60-660rpm (Variable) 60-660rpm (Variable) 44” 44” Floor to Spindle Center Height...

  • Page 8: Standard Accessories

    Standard Accessories 3” Face Plate Face Plate Wrench Knock Out Rod Spur Center Live Center Live Center Pin Tool Kits Locating Rod Tool Support Levelers 3mm Hex Wrench 10mm Hex Wrench Optional Accessories 12” Swing Away Extension Bed (Standard for T-60) Comparator Centers Comparator Front Assembly Comparator Rear Assembly...
  • Page 9 L：12mm Spring Washer x 2 M：12mm Flat Washer x 2 N：Tool Kits x 1 O：Levelers x 4 P：3” Face Plate x 1 Q：12” Swing away Extension Bed (Standard for T-60, Optional for T-50) x 1 R：M12×40 Bolt x 8 S：Operation Manual x 1 Fig.1...
  • Page 10 Assembling Instruction Warning: The lathe must be disconnected from power source during assembly. Legs Installation (Fig. 2) 1, Life the lathe off the pallet by using a hoist or forklift. Place it on a table or workbench with sufficient clearance to allow the support legs to be attached from underneath. 2, Attach the legs to the bed by using 12mm hex head bolts A.
  • Page 11 Comparator Brackets(Optional) See Fig.4, mount the front comparator bracket C to the back of the headstock with two 12mm socket head cap screws. This bracket can be also used for spindle shield guard mounts. Rear comparator bracket should be mounted to the back of the tailstock. The bracket has a slot so it can be aligned with the front comparator bracket.
  • Page 12 B: Right leg: for outboard turning (Fig.7) C: Front bed: for convenience operation (Fig.8) 12” Swing away Extension Bed (Standard for T-60, Optional for T-50) 12” swing away bed is standard for T60 lathe (pre-installed before delivery). If you purchase the Swing Away Bed System as optional accessory, please follow the instructions as below: Fig.9...
  • Page 13 1, With an assistant, attach the extension bed to lathe bed right end with two head cap bolts B. Slightly tighten the bolts. These two bolts must be taken off as soon as swing away system assembly is completed (Fig.9) 2, Adjust the extension bed flush to the lathe bed.
  • Page 14 Change Over of Low-high Speed Ranges This lathe is designed with two speed ranges (Low/High speed range) , within each range, speed can be changed variably by an electronic variable speed controller. To change the spindle speed range, please follow instructions as below (Fig 14): 1 : Unplug the lathe from the power source.
  • Page 15 Tool Rest Base (Banjo) The Banjo is designed with cam-lock system, it can slide along the bed freely when unlocked. Loosen the locking handle and move the Banjo to the desired place. Lock the lever firmly after adjustment. Tool Rest A14″...

  • Page 16: Maintenance

    Faceplate-Mounting and Removing 1, Unplug the lathe from the power source. 2, Mount the faceplate to the work piece. 3, Install the face plate onto the spindle thread and turn it clockwise 4, Insert lock rod A (Fig.16) into hand wheel hole. Hold the rod and tighten the faceplate with faceplate wrench.

  • Page 17: Parts List / Diagrams

    PARTS LIST / DIAGRAMS Parts List For models T-50 and T-60 Note: The parts for T-50 and T-60 lathes are mostly the same, except for some parts are different which clearly specified for T-50 or T-60. Index No. Part No.
  • Page 18 HWT50-01-16 Spindle Hand-wheel M6×12 GB/T 77 Set Screw HWT50-01-14 Degree Indictor HWT50-01-17 Pulley 10×25 GB/T 1096 Flat Key Motor Belt For T-50 7M650 112A Motor Belt For T-60 7M750 HWT50-01-13 Lock Nut Gasket ￠40-46-h1 Nylon Washer Ball Bearing 6208/P6-2RZ Ball Bearing...
  • Page 19 HWT50-02-02 Sleeve HWT50-02-03 Lead Screw HWT50-02-04 Position Ring HWT50-02-05 Washer M8×10 GB/T 77-2000 Set Screw HWT50-02-06 Hand Wheel HWT50-02-07 Handle HWT50-02-10 Lock Handle M6×12 GB/T70.2 Cap Screw HWT50-02-11 Position Block HWT50-03-02 Tool Rest HWT50-03-01 Tool-Post Base M10×25 Adjusting Handle HWT50-03-06 Brass Sleeve HWT50-03-03 Lock Handle...
  • Page 20 Spring Washer GB/T 97.1 Flat washer HWT50-01-28 Position Pin M12-￠8 HWT50-01-03 Support Bracket For T-50 20” 24” 505A HWT60-01-03 Support Bracket For T-60 M10×25 Adjusting Handle 20” HWT50-01-04 Rear Support Bracket For T-50 24” 507A HWT50-01-04 Rear Support Bracket For T-60...
  • Page 21 HWT50-01-43 Profiling Center HWT50-01-44 Profiling Center M6×8 GB/T 77 Set Screw HWT50-01-58 Guard Position Ring 20” HWT50-01-57 Spindle Guard For T-50 24” 512A HWT60-01-57 Spindle Guard For T-60 GB/T 6170 Hex Nut HWT50-01-54 Chisel Storage Rod HWT50-01-53 Chisel Storage Pan...

  • Page 22: Parts Diagrams

    Parts Diagrams 113 114 109 110 129 130 411 413 416-1 416-1 405 404 416-2 431 432 433 434 435 436 440-3 440-2 440-1...
  • Page 23 206 207 007-1 007-2...
  • Page 24 501 502 501 502 531 530 015 016 537 538 547-1 547-2...
  • Page 25 HARVEY Harvey Industries www.Harvey.cn © 2013 Harvey Industries Co.,Ltd All rights reserved.

This manual is also suitable for:

T-60

Table of Contents