Insta360 Flow 2 Pro Start Here Manual page 5

Unfolding and Folding
Mounting a Phone
Attach the Phone to the Magnetic Clamp
Extend the Magnetic Phone Clamp around the middle of your phone, following the icon on the
•
clamp's right side.
Ensure the phone's camera faces the direction marked on the Magnetic Phone Clamp.
•
Attach the Clamp to the Gimbal
Align the magnetic notch on the back of the clamp with the raised bump on the gimbal's
•
magnetic surface.
Match the magnetic groove on the clamp with the red dot (Magnetic Alignment) on the gimbal.
•
Securely attach the clamp.
Unfold and Power On
Hold the handle with one hand and pull the arm outward with the other to unfold the gimbal.
•
The gimbal powers on automatically. Wait for the indicator light to turn on, signaling it's ready
•
for use.
Note:
Ensure the Magnetic Phone Clamp is centered on your phone for an even, secure fit. Attach the
•
clamp to the phone first before mounting it on the gimbal.
The phone's camera should match the direction marked on the clamp for proper alignment.
•
If the light is solid red and the gimbal isn't functioning, double-check the Magnetic Phone
•
3
Flow 2 Pro User Manual