Advertisement
Battery Level/Gimbal Mode Indicators
Gimbal Status
Powered off
Powered on
LED Indicator Lights Status
All four LEDs blink slowly when Flow 2 Pro is in Standby Mode.
All four LEDs blink quickly when an error has occurred. The two most common reasons are:
Flow 2 Pro is physically prevented from moving or is experiencing a technical error. Remove
•
any obstacles, then press any button.
The phone is not centered or secure in the phone clamp. This may lead to abnormal motor
•
heating and trigger Flow 2 Pro's overheating protection. Please recenter and secure the phone.
Operation
Single Press
Power Button
Single Press
Power Button and
the Trigger
Button
/
Check current battery level.
•
Check current battery level.
•
Shows current gimbal mode: AUTO = Auto, F =
•
Follow, PF = Pan Follow, FPV = FPV.
23
Flow 2 Pro User Manual
Descriptions
Advertisement
Need help?
Do you have a question about the Flow 2 Pro and is the answer not in the manual?
Questions and answers