Speedlink DRIFT O.Z. Manual

Also See for DRIFT O.Z.:

Table of Contents

GET STARTED

Place the racing wheel on a smooth, level surface and connect it to your computer's USB port using the USB cable.
Plug the pedal kit into the socket on the back of the racing wheel using the cable.
Install the driver software. It can be downloaded from our website at www.speedlink.com. It is always the latest driver version available.
Keep the Mode button held depressed for three seconds to switch between the racing wheel's two operating modes: XInput (for the majority of current games) and DirectInput* (for all older and some newer games). If the red LED (left) glows, DirectInput* mode is active; if the green LED (right) glows, the device is in XInput mode.

Set the racing wheel to the desired mode before starting a game. Switching during gameplay may stop the game identifying the racing wheel correctly; if this happens, restart the game. Please consult the manual that accompanied the game, ask the publisher or try both modes to establish which mode works the best.
In the driver menu, which you can access via the Control Panel, you can test the racing wheel and button functions, and – in DirectInput* mode – make precise configuration changes such as adjust the sensitivity setting or vibration strength.