Advertisement
To pair the controller with a Nintendo Switch* console for the first time, press and hold the Y button and home button simultaneously. All four channel LEDs will flash and the controller will pair with the console. Press and hold the home button for any future pairing.
The channel LEDs indicate whether the controller is paired with the console. Depending on the channel of each player, different LEDs will light up after pairing.
Press and hold the button you want to set into rapid fire mode, then press the rapid fire button. The rapid fire LED will light up when rapid fire mode is turned on. To turn off rapid fire mode, repeat the procedure.
Connect the controller to a Nintendo Switch* console using the charging cable provided. All four LEDs will flash while the controller is charging. Once the controller is fully charged the LEDs will turn off (if controller is not paired) / the LEDs will stay lit (if the controller is paired). When the battery is running low the channel LEDs will start flashing.
To turn off the console, press and hold the home button and select the power off option on screen.
IMPORTANT SAFETY INSTRUCTIONS
Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks!
Safety instructions in further languages: www.speedlink.com.
Extended use of input devices may cause health problems such as discomfort or pain; as such, take regular breaks and consult a doctor if problems persist.
Lithium battery/Li-ion battery.
Further information: www.speedlink.com
CONFORMITY NOTICE
Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.
Conformity notice in further languages: www.speedlink.com.
IMPORTER/MANUFACTURER:
Speedlink GmbH Im Dorf 5
27404 Heeslingen
Deutschland
Phone: (+49) 4287 9244-0
PRODUCT DETAILS:
Product no.: SL-330402-RRBK
Type description: RAIT Bluetooth Gamepad - for Nintendo Switch*, rubber-black
THE PRODUCT COMPLIES WITH THE FOLLOWING DIRECTIVES:
RED 2014/53/EU RoHS 2011/65/EU
For a full declaration of conformity, the latest user guide or FAQ, please visit www.speedlink.com.
RF frequency range: 2.402GHz – 2.480GHz
RF power transmission: < 8dBm
Further information: www.speedlink.com
All rights reserved. Speedlink, the Speedlink word mark and the Speedlink swoosh are registered trademarks of Zeitfracht GmbH & Co. KGaA.
*Nintendo and Nintendo Switch are registered trademarks of Nintendo Co., Ltd. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. All trademarks are the property of their respective owner. Speedlink GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Speedlink RAIT SL-330402-RRBK - Bluetooth Gamepad Manual
Advertisement
Need help?
Do you have a question about the RAIT and is the answer not in the manual?
Questions and answers