Ii) Solar Charging - Growatt INFINITY 2000 PRO User Manual

II) SOLAR CHARGING

Users must follow instructions for proper machine connection. The company is not responsible for free maintenance if the machine is
damaged due to improper connection outside of the instructions during the warranty period.
You can use up to six 200W solar panels (as shown in Figure Ⅰ) or eight 100W solar panels (as shown in Figure Ⅱ) to charge INFINITY 2000
PRO.
Six 200W Solar Panels
You can use the Solar Charging Cable to connect the Solar Connector on the solar panel and the XT60 port on the right side of the INFINITY
2000 PRO to supply power to the INFINITY 2000 PRO.
Solar Connector
XT60 Port
Figure I. 200W Solar Panels x 6
Eight 100W Solar Panels
When you need to connect 8 pieces of 100W solar panels, you can first connect 4 pieces of 100W solar panels together to form two
modules. Then, as shown in Figure II, use the Solar Charging Cable and Solar Panel Parallel Cable (sold separately) to connect these two
modules to the INFINITY 2000 PRO for charging.
XT60 接口
Solar Panel Parallel Cable
（sold separately）
Figure II. 100W Solar Panels x 8
- 10 -