Advertisement
1
Applications
These instruments fulfills all requirements of applicable European
and national EC directives. We confirm this with the CE mark. The
relevant declaration of conformity can be obtained from GMC-I
Messtechnik GmbH.
METRISO INTRO/BASE/TECH insulation and resistance measur-
ing instruments allow for quick and efficient testing of protective
measures in accordance with DIN VDE 0100, ÖVE-EN 1 (Austria),
NIV/NIN SEV 1000 (Switzerland), and regulations specific to addi-
tional countries.
The device is equipped with a microprocessor and complies with
IEC/EN 61557 / VDE 0413 regulations:
Part 1:
General requirements
Part 2:
Insulation resistance measuring instruments
Part 4:
Instruments for the measurement of resistance at
earthing conductors, protective conductors and bond-
ing conductors
Part 10:
Combined measuring equipment for testing, measuring
or monitoring protective measures
As well as requirements per VDE 0701-0702:
Repair, modification and inspection of electrical appliances.
GMC-I Messtechnik GmbH
The test instrument is especially well suited for:
•
Systems set-up
•
Initial start-up
•
Periodic testing
•
Troubleshooting in electrical systems
The following measurements and tests can be performed with the
insulation measuring instruments:
•
Insulation resistance
•
Low-resistance
•
Voltage
The following can also be tested by using a shielded measure-
ment cable:
•
Floor covering electrostatic discharge capability
7
Advertisement
Need help?
Do you have a question about the INTRO and is the answer not in the manual?