Query And Set Device Parameters - Setup Function; 3.3.1 Paths To The Various Parameters - Gossen MetraWatt INTRO Operating Instructions Manual

3.3 Query and Set Device Parameters
– SETUP Function
SETUP
Ð Turn the rotary switch to the SETUP position.
info appears at the display.
Ð Press ENTER to query battery voltage or firmware version.
Ð Then select the desired operating parameters with the scroll
keys and acknowledge by pressing the ENTER key.
The desired information is displayed in the scroll mode (moving
letters).
10
info

3.3.1 Paths to the Various Parameters

1nFo
← Main Menus →
ESC
START
ENTER stby OFF
Query Parameter ↓
bAtt:
uers
ion
SET
ESC
START
ENTER stby OFF
Set Parameter ↓
rlead
APoFF
blight
bEEP
A.d
iSP
Acknowledge
0. . d
START
iSP
ENTER
GMC-I Messtechnik GmbH