Memory Problems; Lockups And Software Problems - Dell Inspiron 1410 Setup Manual

Solving Problems

Memory Problems

If you receive an insufficient memory
message—
• Save and close any open files and exit any
open programs you are not using to see if
that resolves the problem.
• See the software documentation for
minimum memory requirements. If
necessary, install additional memory
(See the Service Manual on the Dell Support
website at support.dell.com).
• Reseat the memory modules (See the
Manual on the Dell Support website at support.
dell.com) to ensure that your computer is
successfully communicating with the memory.
If you experience other memory problems —
• Ensure that you are following the memory
installation guidelines (see the Service
Manual on the Dell Support website at
support.dell.com).
20
• Check if the memory module is compatible
with your computer. Your computer supports
DDR2 memory. For more information about the
type of memory supported by your computer,
see "Basic Specifications" on page 38.
• Run the Dell Diagnostics (see "Dell
Diagnostics" on page 25).
• Reseat the memory modules (see the
Service Manual on the Dell Support website
at support.dell.com) to ensure that your
computer is successfully communicating
with the memory.
Service

Lockups and Software Problems

If the computer does not start up — Ensure
that the power cable is firmly connected to the
computer and to the electrical outlet.
If a program stops responding — End the
program:
1. Press <Ctrl><Shift><Esc> simultaneously.
2. Click Applications.