Upgrading or Replacing Memory
Your laptop is equipped with a configurable memory unit. The industry standard JEDEC
PC3-8500/PC3-10600 (DDR3) SODIMM memory module connectors are available for memory
upgrade. The table below illustrates all the possible ways system memory can be configured.
Memory connector #1
1 GB
2 GB
4 GB
Removing the Memory Module(s)
1.
Follow the instructions in "Before You Begin" on page
2.
Remove the battery (see "Replacing the Battery Pack" on page
3.
Use your fingertips to carefully spread apart the memory module connector' s spring-
locks until the module pops up.
4.
Remove the memory module.
CHAPTER 4: INSTALLING AND REPLACING COMPONENTS
Memory connector #2
1 GB
2 GB
4 GB
Total Memory
2 GB
4 GB
8 GB
56.
60).
63