Advanced Menu
SATA Operation
1394
OverClock
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
•
ATA: SATA is configured for ATA mode.
•
AHCI: SATA is configured for AHCI mode.
Allows you to enable or disable the IEEE 1394 A connector.
•
Disabled: The IEEE 1394 A connector is disabled and is not
visible to the operating system.
•
Enabled: The IEEE 1394 A connector is enabled.
Allows you to enable or disable CPU bus clock Over-Clocking.
•
Disabled: CPU bus clock is 800 Mhz.
•
Enabled: CPU bus clock is 1066 Mhz
CHAPTER 3: USING YOUR LAPTOP
49