Subscribe to Our Youtube Channel
Related Manuals for KEENZ Duo
Summary of Contents for KEENZ Duo
- Page 4 Axle (1)
- Page 7 Step 1:1. Remove the product from the packaging box. 2. Set aside the wheels and other parts. 3. Adjust the platform to match the state shown in the picture to prepare for installation. Step 2:1. Unlock the folding lock (1), as illustrated in the picture. 2.
- Page 8 Insert the short rear leg tube into the rear axle (as shown in the picture) until you hear a snapping sound, and ensure that the shrapnel insertion hole is confirmed to be installed. Next, insert the entire group into the rear foot of the platform, listen for a click, and confirm that the shrapnel insertion hole has been installed.
- Page 9 FRONT-WHEEL INSTALLATION: •Align the shaft of the front wheel group with the hole of the front foot tube seat and insert it until you hear a distinct ringing sound. Pull the wheel in the opposite direction to confirm that it is securely in place.
- Page 10 FOOTREST FUNCTION In method (A) and (B), you can use the method you want, put the foot pad on, and the foot pad can be used in a flat state. When using the second method, when the folding foot mat is paved, the car cannot be folded.
- Page 11 INSTALLING KEENZ DUO TRAY: Lower the beverage rack to the middle position of the body and hang the beverage rack with four hooks on both sides of the body. Similarly, remove the beverage rack hook from the body.
- Page 12 CANOPY INSTALLATION: 1. Refer to figure (1) for guidance. 2. Open the switch in the direction of the arrow. 3. Lift the carriage pole upward (2). 4. Finally, secure the four angle buckles on the canopy to the four poles to complete the installation.
- Page 13 FOLDING: 1.Begin by removing the large canopy (1) and stowing the pole. 2.Then, squeeze the car handles (2) on both sides and lift them up simultaneously (3). 3.Pull in the pressure (4) on both sides until it is tightened. 4.Finally, fasten the car buckle to complete the folding process.
- Page 14 ENTRANCE-EXIT For pet only Take care not to hurt your pet when getting on and off. Do not use with children. After the bar is removed, the pet entrance can be used...
- Page 15 FASTENING: Snap the buckle on the upper side of the seatbelt into the insert plate, and then insert the combined insert plate into the center buckle of the seatbelt. UNFASTENING: To unfasten the safety belt buckle, press both exposed insert parts on the sides of the center buckle, causing it to pop out and release the buckle.
- Page 18 After installing the canopy, open the four buckles on the top, lower the shade cloth on both sides, and secure it with adhesive buckles.
- Page 19 In addition to providing sunshade, the large canopy can also enhance ventilation. Similarly, by unzipping both sides of the big roof and rolling up the entire roof to one side, you can improve ventilation and create a more comfortable environment for your baby.
- Page 20 HANDLE ADJUSTMENT: Handle adjustment is divided into seven positions. First, press the knob adjustment button inside the handle joint on both sides with your thumb, and then adjust the handle's height as needed, up or down. first position...
- Page 21 REAR-WHEEL BRAKE: Press down on the rear wheel brake pedal to engage the brake, preventing the stroller from being pushed. To disengage the rear wheel brake, lift the brake pedal upward and push the stroller freely.
Need help?
Do you have a question about the Duo and is the answer not in the manual?
Questions and answers