Advertisement
Quick Links
Advertisement
Related Manuals for Hanwha Vision TNO-A26081
Summary of Contents for Hanwha Vision TNO-A26081
- Page 1 NETWORK CAMERA User Manual TNO-A26081...
- Page 2 Network Camera User Manual Copyright ©2024 Co., Ltd. All rights reserved. Hanwha Vision Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
- Page 3 overview IMPORTANT SAFETY INSTRUCTIONS 20. If you install/disassemble the product in a manner that has not been recommended, the production functions/ performance may not be guaranteed. Install the product by referring to “Installation & connection” in the user manual. 1. Read these instructions. 21.
- Page 4 overview Class construction When a new product box is opened (or during the initial use of the product), moisture might build up on the glass of the camera. The built-up moisture disappears naturally within a few An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a hours after powered on.
- Page 5 CONTENTS OVERVIEW WEB VIEWER Important Safety Instructions Connecting to the Camera Recommended PC Specifications Password setting Recommended Micro SD/SDHC/SDXC Login Memory Card Specifications Camera Web Viewer Setup NAS recommended specs Optional Accessories for Installation INSTALLATION & CONNECTION APPENDIX What’s Included Troubleshooting At a Glance Installation...
- Page 6 - Western Digital / Purple QD101 - Transcend / High Endurance ~ TNO-A26081 supports a total of four multiple profiles. When all four profiles are used, additional recording profiles such as SD card cannot be set and used. NAS RECOMMENDED SPECS ~ Recommended capacity : 200GB or higher is recommended.
- Page 7 installation & connection WHAT’S INCLUDED AT A GLANCE As for each sales country, accessories are not the same. Bottom case Top cover Lens Camera-body Power port (DC 12 V) Micro SD card slot HPoE Port Power indicator Reset button SFP module slot Audio/Alarm cable port USB type-C port...
- Page 8 installation & connection INSTALLATION Inserting a Micro SD card 1. Remove the top cover by turning the fastening screws of the top cover on the camera body The camera jack connected to the external cable is not waterproof. You are recommended to install this product below the counterclockwise.
- Page 9 3. When the insertion of the micro SD card is complete, assemble the top cover. Removing a Micro SD card Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD card from the slot.
- Page 10 installation & connection Installation (installing cables) 4. For waterproof protection, pull down the cable below the cable bushing as shown in the figure below. Use a cable bushing compliant with the network cable to be connected. Camera main: use a cable with the diameter of Ø5 to Ø6.5 You can only use a network cable with a diameter of Ø6.5 or less.
- Page 11 6. Connect the network cable connector to the HPoE port of the bottom case. [Installation of the power(DC 12V)/audio/alarm cable] 1. Remove the cable bushing from the bottom case, as shown in the figure below. 2. Insert the cable bushing of the power(DC 12V)/audio/alarm cables into the bottom case. English _11...
- Page 12 installation & connection 3. Connect the audio/alarm cable connector to the audio/alarm cable port of the bottom case. 2. Insert the power terminal block into the power input terminal (DC 12V) on the bottom case. (When connecting DC 12V Power cables) 1.
- Page 13 Installation (bottom case) [When installing using pipe] 1. Install the pipe in the conduit holder. [Directly installing on wall/ceiling] 1. Place the bottom case on the desired location considering the direction to be monitored, mark the locations for the bolt holes, and then drill the holes. 2.
- Page 14 installation & connection Installation (camera body) 2. Assemble the camera body to the bottom case. 1. Connect the provided safety wire to the camera body and the structure on the ceiling or wall. When connecting the safety wire, it should be connected to a structure which can carry the weight of more than three times the camera's weight.
- Page 15 Waterproofing of cable connections Adjusting the monitoring direction for the camera When installing the camera, please waterproof it with waterproof butyl rubber tape (can be purchased in stores) so that water does not leak from the gap of the cable connected to the outside. When adjusting the camera monitoring direction, loosen the corresponding fixing screws, adjust the camera, and then tighten the screws.
- Page 16 installation & connection [Tilt] [Pan] 1. Loosen the tilt adjustment screws on both sides of the camera body and adjust the tilt direction. 1. Loosen the pan adjustment screws on both sides of the camera body and adjust the pan direction. Note that it is not necessary to loosen the screws completely.
- Page 17 [Lens Rotation] [Zooming] 1. Loosen the lens rotation adjustment screws on both sides of the camera body and adjust the lens rotation 1. Loosen the zoom securing lever counterclockwise from the camera module, as shown in the figure. angle. Note that it is not necessary to loosen the screws completely. 2.
- Page 18 installation & connection 3. When adjusting the zoom is complete, fasten the zoom securing lever to secure. CONNECTING WITH OTHER DEVICE WiFi dongle Fiber optic converter HPoE Router 4. When adjusting the monitoring direction for the camera is all done, assemble the top cover. Ethernet Power Connect and use a HPoE-enabled router.
- Page 19 Connecting WiFi Connecting the SFP module Camera Setup 1. Insert the SFP module. 1. Connect the OTG gender (Type C) and WiFi dongle to the USB Type-C port. Smartphone Setup 1. Install the Wisenet Installation application. 2. Select the camera SSID after turning on the WiFi. 3.
- Page 20 installation & connection Ethernet Connection Optical communication ethernet standard Connect to your local network or internet by connecting your ethernet cable or SFP Optic Link. Item Contents The ethernet link on this product supports redundant link between RJ-45 and SFP, and SFP takes priority. Ethernet : Optical communication SFP (LC Type) Behavior example :...
- Page 21 Power Supply Connecting to Audio Input/Output Use a screwdriver to connect the + and - lines of the power adaptor to the provided power terminal block, and then insert them in the power port (DC12V). Speaker Microphone Network If the power sources for HPoE and DC 12 V are simultaneously turned on, the device power will be supplied by both of HPoE and DC 12 V.
- Page 22 installation & connection Connecting to the I/O port box To connect to an external sensor Connect the Alarm I/O cable to the corresponding port of the port box. To use as an Alarm IN: Connect one of the [ALARM I/O] port and the other terminal to the [GND] port. Alarm In Wiring Diagram(example) Alarm cable External connection...
- Page 23 network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE You can set up the network settings according to your network configurations. MODEM CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN INTERNET 1.
- Page 24 If using a Broadband Router ~ IP Address : Enter an address falling in the IP range provided by the Broadband Router. Device manager program can be downloaded from <Support>-<Online Tool> menu at Hanwha Vision website ex) 192.168.1.2~254, 192.168.0.2~254, (https://www.HanwhaVision.com).
- Page 25 ~ Example of the Dynamic IP environment configure the IP. TNO-A26081 - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server 2. Click < + > at the main page of device manager.
- Page 26 network connection and setup PORT RANGE FORWARD (PORT MAPPING) SETUP Setting up Port Range Forward for several network cameras ~ You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page. If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the ~ A user can change each port using the camera setting screen.
- Page 27 CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run device manager. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet browser.
- Page 28 web viewer web viewer CONNECTING TO THE CAMERA Connecting via Bonjour 1. Run the client or operating system in support of the Bonjour protocol. Normally, you would 2. Click the camera name for search. In the Mac operating system, click the camera name searched from the Bonjour tab of Safari. 1.
- Page 29 PASSWORD SETTING CAMERA WEB VIEWER SETUP When you access the product for the first time, you must register the 1. Click the [Setup ( )] icon. login password. 2. The Settings window appears. 3. You can configure settings for the camera’s basic information, video, audio, network, event, analysis, and For a new password with 8 to 9 characters, you must use at least 3 system over the network.
- Page 30 appendix TROUBLESHOOTING PROBLEM SOLUTION PROBLEM SOLUTION Voice is not recorded even though When an Windows 10 user accesses ~ You must enable the <Audio In> check box in <Basic> - <Video Profile>. ~ This is what happens when microphone driver has been set to Realtek driver. audio input settings are configured.
- Page 31 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Hanwha Vision cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Need help?
Do you have a question about the TNO-A26081 and is the answer not in the manual?
Questions and answers