Keyboard - Dell Inspiron 1150 Owner's Manual

4
Press the lever next to the memory module connectors in the direction of the arrow on the
lever (towards the drive) to release the drive.
5
Pull the drive out of the bay.
6
Slide the new drive into the bay until the drive is fully seated.
7
Replace the screw that you removed in step 3.
8
Replace the memory module cover and screw.

Keyboard

1
Complete the instructions in "Before You Begin" on page 65.
2
Use a small flat-blade screwdriver or plastic scribe to lift the notched right edge of the hinge
cover, and pry the cover loose from the hinges and bottom case.
3
Lift the hinge cover up and away from the hinges and bottom case.
4
Remove the four keyboard screws.
NOTICE:
Be careful when removing and handling the keyboard.
5
Lift the keyboard out of the bottom case, and rest it on the display hinges so that the
keyboard connector is exposed.
76
Adding and Replacing Parts
hinge cover
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace.