Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Verkada CM42-S
Summary of Contents for Verkada CM42-S
- Page 1 Install Guide CM42-S Indoor Mini Split Camera...
- Page 2 Verkada product is granted under this document. This document may not be sold, resold, licensed or sublicensed and may not be transferred without Verkada’s prior written consent. No part of this document may be reproduced in whole or in part without the express written consent of Verkada.
- Page 3 Introduction What’s in the box CM42-S Main Unit CM42-S Sensor Unit USB-C Cable Length: 6.56 ft (2m) Bracket Mount Screw, Wall Screw (4 pcs) Wall Anchors (4 pcs) 1/4"-20 (1 pc) Length: 25mm Diameter: 4mm Diameter: 6mm Drive: #2 Phillips...
- Page 4 Example of 1 Blue, 5 Orange flash sequence orange flashes. 1 Blue, 1 Orange 1 Blue, 5 Orange Camera is connected to the PoE, but Camera is not able to resolve Verkada unable to connect to the Switch. hostnames. 1 Blue, 2 Orange 1 Blue, 6 Orange Camera has not received an IP address.
- Page 5 Overview Main Unit Audio In Camera Input (3.5mm) (USB-C) Optional external Connect to sensor microphone input unit before connecting PoE In + - AUX with Terminal Block (12V terminal block) Not currently supported PoE In HDMI Out Ethernet (RJ45) (micro HDMI) For optional live video output...
- Page 6 Overview Sensor Unit Ambient Light Sensor IR LEDs 2x per side, 4x total Front of the Sensor Unit Adjustable Bracket USB-C Port Back of the Sensor Unit...
- Page 7 Overview Sensor Unit Dimensions...
- Page 8 Installation Adjust the Sensor Unit To rotate the sensor unit on the bracket for angled surfaces, use the provided T10 screwdriver to loosen the bracket screws. The sensor unit can also be taken off the bracket and reattached for more orientation options.
- Page 9 Installation Mounting Sensor Unit The sensor unit bracket can be mounted to a surface using the provided slots or using the 1/4”-20 hole, found commonly in threaded mounting solutions. It can also be mounted using the included adhesive for non-destructive installs. For a solid material like wood or metal, drill pilot holes.
- Page 10 Installation Mounting Options The sensor unit can be mounted in various orientations by adjusting the bracket and utilizing the provided adhesive or other mounting hardware. The sensor unit can be mounted to a frame on a television by using mounting adhesive or a 1/4”-20 screw.
- Page 11 Installation USB-C Cable Orientation Depending on the mounting scenario, utilize a USB-C cable orientation that keeps the cable out of the way of the sensor. Alternate Cable Orientation The L-shaped side of the USB-C cable can be utilized in cases of limited space.
- Page 12 See additional LED states and definitions under LED Behaviors. For easy registration and setup, scan the QR code on the product. If you prefer to manually register your product, please proceed to: verkada.com/start Scan QR Code to access Command...
- Page 13 Installation Main Unit Mounting The main unit can be mounted to a surface using the provided slots. It can also be mounted using the included adhesive for non-destructive installs. For a solid material like wood or metal, drill pilot holes. Drive the provided mounting screws directly into the pilot holes.
- Page 14 Appendix CM42-S Compliance Caution Maintenance and repair work must always be carried out by qualified technical personnel. Disconnect power from the unit when performing a maintenance task. Wiring methods used for the connection of the equipment to earth shall be in accordance with the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part 1, CSA C22.1.
- Page 15 Appendix Support Thank you for purchasing this Verkada product. If for any reason you're experiencing issues or need assistance, please contact our 24/7 Technical Support Team immediately. Sincerely, The Verkada Team verkada.com/support...
Need help?
Do you have a question about the CM42-S and is the answer not in the manual?
Questions and answers