Dell POWER VAULT 130T LIBRARY 130T Installation Manual page 10

Figure 4. Connecting the SCSI cable
Connecting the SCSI cable
Item
Number
1
2
3
4
CAUTION: The tape drive interface cable (P980-P983) marking faces the rear of
the tape drive. Note this orientation when reinstalling. The connector is keyed
but it is still possible to insert it incorrectly.
7.
Connect the tape drive interface cable (P983) to the tape drive interface connector on
the tape drive.
Drive
Number
Drive 0
Drive 1
Drive 2
Drive 3
8.
Connect the tape drive power cable to the tape drive.
6 Drive Tray Assembly Conversion Instructions
Parts Description
Tape Drive Interface Cable (P983)
Thumbscrew (2x)
SCSI Connector (2x Per Drive)
Drive 0
Drive Interface Connector
P983
P982
P981
P980