Page 1
Angular Drop Steps Part #: S/BEXC19CC-TX 2019+ Chevy Silverado® 1500/2500/3500 Crew Cab For Technical Support / Warranty Information please call 1-800-776-0767 Smittybilt, 1017 W. 600 N. STE 4, Ogden, UT 84404 2019+ Chevy Silverado® 1500/2500/3500 Crew Cab Rev 6/28/2023 Part # S/BEXC19CC-TX...
Page 2
Introduction Thank you for choosing Smittybilt accessories for your Chevy® Truck. If you would like to view our full range of available accessories, please visit us at www.smittybilt.com Fridge Slides Waypoint™ 55L Fridge Recovery Gear and Winches Chevy® and Silverado® are registered trademarks of General Motors®...
Page 3
(8) M8-1.25x30mm, (8) M8 Flat Washers, and (8) M8 Split Lock Washers. For Technical Support / Warranty Information please call 1-800-776-0767 Smittybilt, 1017 W. 600 N. STE 4, Ogden, UT 84404 2019+ Chevy Silverado® 1500/2500/3500 Crew Cab Rev 6/28/2023...
Page 4
Repeat Steps 1&2 for the Passenger Side Step. Step 4: Installation is now complete. For Technical Support / Warranty Information please call 1-800-776-0767 Smittybilt, 1017 W. 600 N. STE 4, Ogden, UT 84404 2019+ Chevy Silverado® 1500/2500/3500 Crew Cab Rev 6/28/2023 Part # S/BEXC19CC-TX...
Page 5
Repeat Steps 1-4 for the Passenger Side Nerf Step. Step 6: Installation is now complete. For Technical Support / Warranty Information please call 1-800-776-0767 Smittybilt, 1017 W. 600 N. STE 4, Ogden, UT 84404 2019+ Chevy Silverado® 1500/2500/3500 Crew Cab Rev 6/28/2023 Part # S/BEXC19CC-TX...
Page 6
Use this only as a guide for hardware without a called out torque specification in the instruction manual. For Technical Support / Warranty Information please call 1-800-776-0767 Smittybilt, 1017 W. 600 N. STE 4, Ogden, UT 84404 2019+ Chevy Silverado® 1500/2500/3500 Crew Cab Rev 6/28/2023...
Page 7
5-YEAR FINISH WARRANTY Smittybilt Automotive Products, LLC (SAP) warrants to the original purchaser that (a) the physical components (e.g., metal com- ponents, welds, etc.) of any SAP 2019+ Chevy® Silverado 1500/2500/3500 Angular Drop Steps will be free of defects in ma- terial and workmanship for the lifetime of the product from the date of purchase of the Nerf Steps, and (b) the finish will be free of defects in material and workmanship for a period of 5-years from the original date of purchase.
Need help?
Do you have a question about the SBEXC19CC-TX and is the answer not in the manual?
Questions and answers