Download Print this page

KAMEHA KA243 Manual

Hdmi over ip kvm optical extender 40km 4k60hz – kameha

Advertisement

Quick Links

KA243 HDMI OVER IP KVM OPTICAL EXTENDER
Introduction
This product is a 4K@60Hz HDMI KVM optical extender kit consisting of a transmitter and a
receiver, using ipcolor STREAM technology for high- definition, low-latency transmission.
The 4K@60HZ HDMI signal can be extended up to 40km by LC single-mode fiber cable,
supporting one-to-one connection, one-to-many connection via gigabit switch, or switch
cascading. It also support HDMI loop out, KVM, and RS-232 pass-through, and can be widely
used in meetings, home entertainment, educational presentations, and other fields.
Features
1. Adopting ipcolor STREAM technology can realize high-definition and low-latency
transmission.
2. Support up to 3840x2160@60HZ resolution, backwards compatible.
3. Support optical fiber transmission, the maximum transmission distance of 40km.
4. Support one-to-one or one-to-many connections through the gigabit switch.
5. Support RS-232 pass-through.
6. The transmitter support HDMI loop out.
7. Support KVM control signal pass back.
8. The transmitter has a 3.5 mm audio input for sound embedding, the receiver has an
independent 3.5 mm audio output.
9. Firmware can be upgraded through Micro USB.
10. Lightning protection, surge protection, ESD protection.
11. Support steady 24-hour operation.
40KM 4K60HZ – KAMEHA

Advertisement

loading
Need help?

Need help?

Do you have a question about the KA243 and is the answer not in the manual?

Questions and answers

Summary of Contents for KAMEHA KA243

  • Page 1 KA243 HDMI OVER IP KVM OPTICAL EXTENDER 40KM 4K60HZ – KAMEHA Introduction This product is a 4K@60Hz HDMI KVM optical extender kit consisting of a transmitter and a receiver, using ipcolor STREAM technology for high- definition, low-latency transmission. The 4K@60HZ HDMI signal can be extended up to 40km by LC single-mode fiber cable, supporting one-to-one connection, one-to-many connection via gigabit switch, or switch cascading.
  • Page 2 Technical Parameters Item Transmitter Receiver Video Input inter face 1x HDMI 1x SFP to LC 1x SFP to LC 1x HDMI Output inter face 1x HDMI HDMI length ≤ 5m ≤ 5m Maximum 18Gbps transfer rate Compatibility HDMI 2.0 HDCP 1.4/HDCP 2.2 Resolutions 3840x2160@24/30/50/60Hz, 1080p@50/60Hz, 720p@50/60Hz, 1920x1200@60Hz, 2560x1440@60Hz,...
  • Page 3 Panel Description 1. Transmitter 1. Reset Press to restart the device 2. Power indicator(blue) The indicator will turn on when the power is turned on 3. Status indicator (orange) Light off: The transmitter and the receiver have not established a connection.
  • Page 4 2. Receiver Reset Press to restart the device Power indicator (blue) The indicator will turn on when the power is turned on Status indicator Light off: The transmitter and the receiver have not (orange) established a connection. Slow flash: The transmitter and the receiver are connected but no video data transmission (gigabit Ethernet).
  • Page 5 Installation Procedures 1. Connection Diagrams 1.1 One-to-one connection 1.2 One-to-many connection (through gigabit switch):...
  • Page 6 1.3 One-to-many connection (cascade of gigabit switches):...