Related Manuals for EKOVENT EKO-RBE
Summary of Contents for EKOVENT EKO-RBE
- Page 1 Fire Damper EKO-RBE (incl, -R -C) Installation and Maintenance Instructions 2024-09...
-
Page 2: Table Of Contents
Assembly instructions ......7-8 General assembly ........4-5 Operation and maintenance .......9 Mounting accessories ........6 Declaration of performance......10 Owner of manufacturing site: EKOVENT AB, Vellinge Certification by: DBI Certification A/S, nr 2531 Product type description: EKO-RBE, -R, -C Approval number:... -
Page 3: Product Management
Furthermore, they must be handled carefully to avoid any mechanical damage. EKOVENT AB hereby disclaims all responsibility for: – Damage due to incorrect transport, – Personal injury or property damage as a handling or storage. -
Page 4: General Assembly
At assembly, the following minimum dimensions must be taken into account: – Minimum distance between dampers: 200 mm – Minimum distance to wall/floor: 75 mm EKOVENT AB The right to changes is reserved 2024-09... -
Page 5: Electrical Connection
Wiring Diagram EKO-RBE Electrical Connection Electrical connection must be carried out by an authorized person according to AC 24 V drawings and current wiring diagram. DC 24 V N L1 AC 230 V S1 S2 S3 S4 S5 S6 < 5°... -
Page 6: Mounting Accessories
Mounting Accessories 2 st förlängningsstosar krävs Connection Socket EKO-ANS End Device EKO-FLSNS Anslutningsstos Förlängningsstos EKO-ANS EKO-FLS EKO-RBE EKO-FLSN EKO-RBE fire damper with round connection spigots Ød EKO JBG Mont med mått 2013 Ød Connection Guide Guide Guide Guide Guide Guide... -
Page 7: Assembly Instructions
B+30 mm × H+30mm The fire damper must always mounted with the damper shafts horizontal. Attach the fire damper with guide or flange connection. Note! Ensure that the hole diagonal measures are equal. EKOVENT AB The right to changes is reserved 2024-09... - Page 8 RKG, refer to the document “EKO-RGK Installation Instructions” on the website under the product name “EKO-RBE”. • Important! Check that the movement of the damper blades is not obstructed. • Suspension device for dampers and ducts must correspond to the perforated fire technical class of the building part, as specified in the ”Installationsskydd...
-
Page 9: Operation And Maintenance
• operation • the fire damper closes completely • the fire damper opens fully • the fire damper closes completely in • the event of a power failure. EKOVENT AB The right to changes is reserved 2024-09... -
Page 10: Declaration Of Performance
Pass The performance of RBE/-R/-C is in conformity with the declared performance above. This declaration of performance is issued under the sole responsibility of EKOVENT AB. Signed for and on behalf of the manufacturer by: Vellinge 2024-09-03, Ljubomir Doslic, Product Manager... - Page 11 Notes: EKOVENT AB The right to changes is reserved 2024-09...
- Page 12 Installation and Maintenance Instructions Notes: EKOVENT AB The right to changes is reserved 2024-09...
- Page 13 Tel 090-13 33 01 REGIONAL OFFICE GÖTEBORG Boråsvägen 5, 435 31 Mölnlycke Tel 031-23 07 40 HEAD OFFICE Mejselgatan 7, 235 32 Vellinge REGIONKONTOR STOCKHOLM Tel 040-42 16 00 Medborgarplatsen 25, 118 72 Stockholm www.ekovent.se info@ekovent.se Tel 08-508 613 00...
Need help?
Do you have a question about the EKO-RBE and is the answer not in the manual?
Questions and answers