Sima STAR-16 PRO Original User Manual

Hide thumbs Also See for STAR-16 PRO:

Original user manual (69 pages)

page of 22

/ 22
Bookmarks

Quick Links

Download this manual

Sima

MANUAL DE INSTRUCCIONES ORIGINAL

ORIGINAL USER GUIDE

MANUEL ORIGINAL D'UTILISATION

Information classification: Ramirent Standard

STAR-16 PRO

STAR-20 PRO

C/ Albuñol, par.250

Poi. lnd. Juncaril,

18220 ALBOLOTE (Granada) ESPAÑA

Telf: (+34)958 490 410

Fax: (+34) 958 466 645

info@simasa.com

www.simasa.com

Need help?

Do you have a question about the STAR-16 PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for Sima STAR-16 PRO

Page 1 Information classification: Ramirent Standard Sima MANUAL DE INSTRUCCIONES ORIGINAL ORIGINAL USER GUIDE MANUEL ORIGINAL D'UTILISATION STAR-16 PRO STAR-20 PRO C/ Albuñol, par.250 Poi. lnd. Juncaril, 18220 ALBOLOTE (Granada) ESPAÑA Telf: (+34)958 490 410 Fax: (+34) 958 466 645 info@simasa.com www.simasa.com...
Page 2 Information classification: Ramirent Standard ENGLISH...
Page 3 ENGLISH 1. GENERAL INFORMATION................4 2. GENERAL DESCRIPTION OF THE MACHINE..........4 3. PARTS OF THE MACHINE................5 3.1 STAR-16 PRO........................5 3.2 STAR-20 PRO........................6 4. TRANSPORT....................7 5. PICTOGRAMS ....................7 6. SUPPLIED WITH MACHINE................8 6.1 ASSEMBLY ACCESORIES ....................
Page 4 1. GENERAL INFORMATION. WARNING: Please read and understand perfectly the present instruction before using the machine. SIMA S.A. thanks you for your trust in our products and for purchasing the BENDING OR COMBINED ELECTRICAL CUTTING/BENDING MACHINE. This manual provides you with the necessary instructions to start, use, maintain and in your case, repair of the present machine.
Page 5 Information classification: Ramirent Standard ENGLISH 3. PARTS OF THE MACHINE. 3.1 STAR-16 PRO. BAR SUPPORT. BENDING PLATE PROTECTION. BAR LENGTH MEASURER. PRECISION ANGLE ADJUST. CHASIS. BENDING SUPPORT. BENDING MANDRELS. BENDING PLATE. END OF BEND SENSOR. MACHINE ZERO LIMIT SENSOR. PEDAL.
Page 6 Information classification: Ramirent Standard ENGLISH 3.2 STAR-20 PRO. BAR SUPPORT. BENDING PLATE PROTECTION. BAR LENGTH MEASURER. PRECISION ANGLE ADJUST. CHASIS. BENDING SUPPORT. BENDING MANDRELS. BENDING PLATE. END OF BEND SENSOR. MACHINE ZERO LIMIT SENSOR. PEDAL. BENDING KIT FOR BIG DIAMETERS. Control panel: 1.
Page 7 Information classification: Ramirent Standard ENGLISH Control panel STAR-20 PRO 1 Phase: 1. POWER SWITCH. 2. OVERLOAD LIGHT. 3. FORCE RETURN SWITCH. 4. INVERSE SWITCH. 5. VOLTMETER. 6. AMPEREMETER. 7. EMERGENCY STOP BUTTON. 4. TRANSPORT. The machine has been packed on a pallet that makes its transport with trucks or manual pallets transporters easy.
Page 8 Information classification: Ramirent Standard ENGLISH 6. SUPPLIED WITH MACHINE. 6.1 ASSEMBLY ACCESORIES. For transport reasons the machines are sent with the accessories uninstalled. Install the accessories as in the pictures. BENDING PLATE PROTECTION: This needs to be assembled as indicated in the image: wide wing washer, plate protector, spring washer and screw.
Page 9 BENDING SUPPORT (STAR-16 PRO): The bending support is used for supporting multiple bars for the bend. The STAR-16 PRO stirrup bender only rotates clockwise, so the bending support must be mounted to the left of the bending plate as shown in the figure. To distance the bending square according to the bar that we use, we must loosen the screw and slide it...
Page 10 BENDING SUPPORT AND BENDING KIT FOR BIG DIAMETERS (STAR-20 PRO): The STAR-20 PRO model has a different square than the STAR-16 PRO, which allows bending of larger diameter bars thanks to the fact that it has a bending kit for big diameters.
Page 11 Information classification: Ramirent Standard ENGLISH STIRRUP DEVICE (STAR-16 PRO): The STAR-16 PRO model has a device that allows you to make stirrups with bars up to Ø10mm in a simpler and faster way than with the bending support. Its placement is simple, just place it on the bending plate and screw in the 3 screws it has on the table, as seen in the image: 6.2 PARTS OF THE BENDING PLATE.
Page 12 Any tool or accessory added or amended without written authorization from the manufacturer is considered inappropriate and dangerous. If any damage or injury is caused as a result thereof or by misuse of the machine, SIMA S.A. exempts all responsibility as manufacturer. The machine must be installed on a plane, firm and horizontal surface and the ground should not be soft.
Page 13 Machine 400V = 360V min / Max 440V max Machine 230V = 207V min / Max 253V max Turn the power switch (STAR-16 PRO) or switch selecting the bending direction (STAR-20 PRO) and the green light will light up. If the voltage appears on the display, but the green light does not light up, it is because there is an active alarm: the emergency stop button is pressed or the bending plate protection is not in its working position.
Page 14 STAR PHASE:Control scheme / STAR Date: 03/05/2023 Folio: STAR·I6 Pro STAA-20 Pro GB2CB07 GV2ME14 ¿' �- ABL6TS06B 24V~ 400 V~ Author: SIMA S.A. TRJFÁSJCA:Esquema de fue12a / TRIPHASÉ:Schéma f-------------lSTAR STAR PHASE:Power scherne / STAR puissancll--------------------------------------- 1 Date: 03/05/2023 Folio:...
Page 15 Information classification: Ramirent Standard ENGLISH...
Page 16 Information classification: Ramirent Standard ENGLISH MANUAL EMERGENCY RETURN OF BENDING PLATE. If during the bend you want to stop the process press the RETURN button and use the pedal to return to a previous position or to the start. 7.4 CHANGING PHASES TO ESTABLISH CORRECT BENDING DIRECTION (THREE-PHASE VERSIONS).
Page 17 Information classification: Ramirent Standard ENGLISH 8. MAKING A BEND. Before starting to bend a rebar make some bends without any accessories on the machine until you are comfortable with the movement. Divide the bending plate into 4 imaginary 90º sections. Select bending direction with the control panel button.
Page 18 Information classification: Ramirent Standard ENGLISH 9. MAINTENANCE. First oil change after 1000 hours of use if mineral oil is used and then again after 3000/4000 hours if the oil used is synthetic or after 3 years of use if these hours aren´t reached. If synthetic oil is used, change oil after 20,000 hours.
Page 19 Start limit switch. continuity (1 open 0 closed). starting point. 11. DATA SHEET. 1,5Kw Single. 216 Kg. 230V STAR-16 PRO 1,5Kw Three. 400V / 230V 214 Kg. 1,5Kw Single. 216 Kg. 230V STAR-20 PRO 214 Kg.
Page 20 ATTENTION: You are to follow all safety recommendations mentioned in the present user manual and comply with all labour risks prevention norms in every location. SIMA, S.A. is not responsible for the consequences possibly generated but the inadequate use of the bending or the combined (bending/cutting) machine.
Page 21 15. SPARE PARTS. The spare parts for the bending and combined machines, manufactured by SIMA, S.A. are to be found in the spare parts plan, attached to this manual. To order any spare part, please contact our alter-sales service clearly indicating the serial number of the machine, model, manufacturing number and year of manufacturing that show on the serial number plaque or sticker.
Page 22 Information classification: Ramirent Standard ENGLISH SOCIEDAD INDUSTRIAL DE MAQUINARIA ANDALUZA, S.A. POL. IND. JUNCARIL, C/ALBUÑOL, PARC. 250 18220 ALBOLOTE (GRANADA) Telf.: 34 - 958-49 04 10 – Fax: 34 - 958-46 66 45 FABRICACIÓN DE MAQUINARIA PARA LA CONSTRUCCIÓN ESPAÑA...

This manual is also suitable for:

Star-20 pro