Midea MRU21C7BST User Manual page 16

MODE button
> Mode button to switch full freezing mode - > full refrigerated mode - >
refrigerated freezing mode
Temperature button
> Press the temperature adjustment button to adjust the setting gear, COLDEST-
> COLD.
> The four gears in the refrigerated mode are 2 °C, 4 °C, 6 °C, 8 °C.
> The four gears in the freezing mode are -24 °C, -20 °C, -18 °C, -16 °C.
> The four gears in the refrigerated/freezing mode are 2/-24 °C, 4/-20 °C, 6/-18
°C, 8/-16 °C .
Network configuration button
> Press and hold the mode button for 3 seconds to enter the network
configuration mode, with wifi light blinking.
Engineering mode
> Press the mode button and the temperature adjustment button at the same
time for 10s, the refrigerator enters the engineering mode, and all LEDs flash;
Then press the temperature adjustment button to select the appropriate
mode.
Error code
> The following warnings appearing on the display indicate corresponding faults
of the refrigerator. Though the refrigerator may still have cold storage function
with the following faults, the user shall contact a maintenance specialist for
maintenance, so as to ensure optimized operation of the appliance.
Fault Code
LED7/8 Blinking
LED6/8 Blinking
LED5/8 Blinking
LED5/7 Blinking
Fault Description
Fault of the fridge's temperature sensor
Fault of the freezer's defrosting sensor
Fault of the environmental temperature
Fault of the freezer's temperature sensor
16