Jabra FREEWAY User Manual page 13

The Jabra FREEWAY is loaded with voice announcements that talks
you through setup and daily operation . In the table below you can
see the most common announcements .
FREEWAY
announcements to you
"Welcome! You are now
ready for pairing . Go to
the Bluetooth menu on
your phone .
Turn on or enable
Bluetooth .
Search for devices and
select your Jabra hands
free device . Select pair
or OK . If asked for a PIN
code enter 0000"
"Pairing failed"
"Connected"
"Two devices connected"
"Disconnected"
"Battery level is low"
"Voice on/off"
"Call from <name from
phone address book or
number>"*
* Phone dependent
Voice guidance
What it means
The FREEWAY is in pairing mode .
Announced automatically when
powered on the first time and
whenever FREEWAY is put into
pairing mode .
Announced if pairing fails
Announced when FREEWAY is
connected to a phone
Announced when FREEWAY is
connected to two phones/devices
Announced if a connected phone/
device is turned off, goes out of
range or has BT disabled while in
range and while the speakerphone
is still turned on .
Announced when the battery level
goes below 10%
Announced when voice guidance
and controls are enabled or disabled
Announced when there is an
incoming call if your phone/device
supports caller ID (PBAP)
JABRA FREEWAY
12