Jabra FREEWAY - Speakerphone Manual

ABOUT YOUR JABRA FREEWAY

This instruction manual will get you started and ready to make the most of your speakerphone.

WHAT YOUR SPEAKERPHONE CAN DO

Your Jabra FREEWAY lets you do all this:

• Make and answer calls just using your voice
• Ease of use with Jabra Voice Guidance
• Last number redialing and call back last number
• Voice dialing*
• Three way calling*
• Advanced MultiUse™ - be connected to two active Bluetooth devices at the same time
• Tells you who is calling*
• Transfer music and calls to your car radio
• Turns on and off automatically using the builtin G-sensor
• Listen to wireless stereo music in Virtual Surround Sound*

Specifications

• Up to 14 hours of talk time and 40 days of standby time
• Rich and crisp stereo sound and Virtual Surround Sound
• Dual microphones provides outstanding background noise reduction
• Digital sound enhancements via DSP technology
• Clear wireless streaming of you r favorite multimedia: Music, podcasts, video, etc. (from A2DP enabled devices*)
• Bluetooth technology – Easy pairing with Bluetooth 2.1 + EDR & eSCO
• Supported Bluetooth profiles: HFP, HSP, A2DP, AVRCP, PBAP
• Up to 128-bit encryption
• Rechargeable battery with charging option from car charger or PC using the supplied USB cable
• Operating range up to 10 meters (approximately)
• Weight 150 grams
• Size: L 100 mm x W 120 mm x H 20 mm

* Phone dependent

GETTING STARTED

You should follow three steps before using your speakerphone:

1. Charge your Speakerphone using the supplied USB cable and car charger (approximately 2 hours)
2. Activate Bluetooth® on your phone or device (refer to the manual of your device)
3. Pair your speakerphone to your phone or device

The first time you turn your Jabra FREEWAY on you will hear Voice Guidance telling you what to do.
NOTE: Voice Guidance and Voice commands are enabled as the default setting when you turn on your Jabra FREEWAY the first time. You can at any time disable both by pressing the Voice button while you slide the power switch into the On position. You will hear "Voice off" and FREEWAY will no longer talk to you or listen for commands. Repeat the process to enable the voice features again.

CHARGE YOUR SPEAKERPHONE

Make sure that your speakerphone is fully charged before you start using it. Use the USB cable to connect Jabra FREEWAY to the car charger. Plug the car charger into your car's power outlet. The charging indicator light will light up in red while charging. When the Jabra FREEWAY is fully charged the indicator light will turn off. A full charge takes approximately two hours.
Jabra FREEWAY can be charged outside your car using the USB cable.

Only use the charger provided in the box – do not use chargers from other devices as this may damage your speakerphone. Also you should not use your supplied FREEWAY charger to charge other devices.
NOTE: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.

TURNING YOUR SPEAKERPHONE ON AND OFF

• Slide the On/Off power switch to turn the speakerphone on or off.
• If the switch is left in the On position the Jabra FREEWAY will automatically turn on and reconnect to your phone when you enter your car (open the car door).

The Jabra FREEWAY will automatically turn off when your phone is moved away from the car.
NOTE: Moving the Jabra FREEWAY will also turn it on if the power switch is in the On position.

PAIRING IT WITH YOUR PHONE/DEVICE

Speakerphones are connected to mobile phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a speakerphone in a matter of seconds.

1. Activate Bluetooth® on your phone/device
2. Turn the Jabra FREEWAY on
3. The first time you turn the FREEWAY on it will automatically enter into pairing mode. The Answer/end button will flash with a blue light and you will be voice guided through the pairing process. If you have disabled voice guidance go to the Bluetooth® settings menu on your phone/device and search for new Bluetooth® devices. Choose Jabra FREEWAY.
4. When pairing is complete you will hear "Connected". You are now ready to start using your Jabra FREEWAY.

NOTE: If asked for a passkey or pin code use 0000 (four zeros)

PAIR A NEW OR SECOND DEVICE

1. Ensure that the Jabra FREEWAY is turned on
2. Tap the Voice button. You will be asked to "Say a command"
3. Say "Pair new device" and follow the instructions
4. If this is your second device you will need to reconnect to the first device afterwards

NOTE: If you have disabled Voice Guidance you can put Jabra
FREEWAY in pairing mode manually by pressing and holding the Answer/end button while you slide the power switch into the On position. The Answer/end button will flash blue to indicate that you are in pairing mode.

CONNECTING WITH YOUR PHONE

Pairing is only needed the first time a speakerphone and a phone/ device are used together. When the speakerphone and phone/ device have been paired once they will automatically reconnect when the speakerphone is on and Bluetooth® is activated on the phone/device.
If the devices are paired, but do not immediately reconnect tap the Answer/end button.

PLACE THE SPEAKERPHONE IN YOUR VEHICLE

The Jabra FREEWAY sits discreetly and conveniently on the sun visor using the attached clip. For optimal sound quality place the Jabra FREEWAY right in front of you and speak directly into the speakerphone.

HOW TO

The Jabra FREEWAY is easy to operate. The buttons performs different functions depending on how long you press them.

Answer a call

• Tap the Answer/End button
• Say "Answer" after the caller is announced.*

End a call

• Tap the Answer/End button

Reject/ignore a call*

• Double Tab the Answer/End button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to voice mail or hear the busy signal
• Say "Ignore" after the caller is announced.*

Make a call*

• Tap the Voice button and you will be prompted to "Say a command". You can then:
• Say "Redial" to redial last outgoing number
• Say "Call back" to call back the last incoming number*
• Say "Phone commands" to activate the voice dialing feature on your phone**
• You can also place a call directly from your phone. If your phone is connected it will automatically transfer the call to your Jabra FREEWAY*. If the call does not transfer, tap the Answer/ end button.

Last number redial*

• Double tap the Answer/End button

Activate Voice dialing**

• Press the Answer/end button to activate the phones voice dialing or tap the Voice button and say "Phone commands".*

Mute/un-mute

• Tap the Mute button during a call to mute your microphone during a call and again to turn mute off.

Adjust sound and volume

• Tap the Vol- or Vol+ buttons to adjust the volume when on a call or listening to wireless on your Jabra FREEWAY.

Three way calling*

• Press the Answer/end button to switch to call on hold. Press the Answer/end button to switch back to first call.

Play music*

• If your phone supports A2DP audio streaming then you can transfer music or any other type of audio to the FREEWAY.

Answer a call while playing music*

• If you have an incomming cal while listening to music on the Jabra FREEWAY the music will pause and you will hear your ringtone or caller ID. You can then chose to aswer or ignore the call. After the call the music will start to play again*.

* Phone dependent
** Refer to phone's user manual

JABRA VOICE FEATURES

When you have an incoming call you can answer or ignore just using you voice. You do not have to touch Jabra FREEWAY or you phone. Just say "Answer" to take the call and "Ignore" to reject.

At any time when you are connected to a phone you can tap the Voice button, wait for Jabra FREEWAY to ask you to "Say a command", and then say one of the following commands.

When you are playing music on the Jabra FREEWAY you can at any time tap the Voicebutton to remote control you music player using your voice.

The Jabra FREEWAY is loaded with voice announcements that talks you through setup and daily operation. In the table below you can see the most common announcements.

ADDITIONAL FEATURES

Play music, podcasts and audio from GPS applications*
If your phone or device supports A2DP audio streaming you can hear your music or any other audio through your Jabra FREEWAY. Simply start playing your music or start your application and the audio will automatically transfer to FREEWAY. If your phone rings the audio will mute and you can answer or ignore the call. The audio will resume after the call.*
You can also start your music player by tapping the Voice button. Wait for the FREEWAY to ask you to "Say a command" and then say "Play"*.
When playing music you can at any time tap the Voice button again and:

• Say "Next track" and "Previous track" to skip between songs
• Say "Stop" or "Play" to start or stop your music

If you want to exit A2DP streaming mode or stop the music you can:

• Tap the Voice button and say "Stop"
• Stop the music/audio in your device

Using you Jabra FREEWAY with two mobile devices at the same time
The Jabra FREEWAY supports Advanced MultiUse™ and is capable of having two mobile phones (or other Bluetooth® devices) connected at the same time. This will give you the freedom of having only one headset to operate both of you mobile phones/ devices.
When you have two active phones/devices connected you will hear "Two devices connected". In this state the phone paired last will be used for voice dialing. When two phones are connected you can place and answer calls on both and switch between the two. If you are on a call and receive a second call you will be alerted by a tone. You can then:

• Put the first call on hold and accept the incoming call by pressing the Answer/end button
• Switch between the two active calls by pressing the Answer/ end button again
• Tap the Answer/end button once to end the first call and accept the new incoming call

FM Transmitter
You can transmit your calls, music and GPS directions from your phone/device to your car stereo using the built-in FM transmitter.
Tap the FM button and set your radio to the announced frequency. If you experience interference from a radio station on your set frequency you can either tap the FM button to quickly redirect the audio back to the FREEWAY or press the VOL+ button to search for a new frequency.
If your radio supports RDS it will automatically adjust to the new frequency. If it doesn't you have to manually set the radio to the new frequency.
Note: When in FM mode the volume controls on the FREEWAY are disabled. Use the volume control on your car radio instead.
QUICK REFERENCE TABLE FOR MANUALLY CONTROLLING YOUR JABRA FREEWAY