Jabra FREEWAY User Manual page 17

I am having pairing problems
- You may have deleted your speakerphone pairing connection
in your mobile phone/device . Follow the pairing instruction to
pair it again .
I want to reset the pairing list in my speakerphone
- The speakerphone registers a list of up to 7 mobile phones . To
clear the pairing list and reset the Jabra FREEWAY to factory
settings you can turn the FREEWAY on while pressing the FM,
Voice and Answer/end button for about 6 seconds . The next
time you power on the Jabra FREEWAY it will automatically go
into pairing mode .
Will the Jabra FREEWAY work with other Bluetooth
equipment?
- The Jabra FREEWAY is designed to work with Bluetooth mobile
phones . It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1 .1 or higher and support
a headset, hands-free and/or advance audio distribution profile .
I cannot use Reject call, call on hold, Redial or voice dialing
- These features are dependent on the ability of your phone to
support a hands-free profile . Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices . Please consult
your device manual for details .
Please note that some features can only be operated from the
primary device e .g . voice dial using Jabra FREEWAY with 2 mobile
phones .
I can not connect speakerphone and radio via FM transmitter
- Make sure the radio is turned on and speakerphone is in FM
mode (FM Status Icon is on) .
- If your radio when searching is not able to find the FM frequency
set by your speakerphone, the FM frequency must be tuned
in manually on the radio . Please read radio manual to find out
how to manually change frequency on your radio .
- If your radio is in TA (Traffic Announcement) mode, switch TA
off and your radio should be able to find your speakerphone
when using the search function on the radio . If not tune in
manually .
JABRA FREEWAY
16