Advertisement
The actual product materials and fabrics may vary from the picture shown.
The Swedish Massaging Cushion comes with a screw located on the back of the unit to protect the massage mechanism during shipment, which must be removed before the first use to allow the Swedish feature to function. Use the provided Allen wrench. Then, properly dispose of the screw.
Failure to remove screw may cause permanent damage to the massage cushion.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Untie cord strap, extend cord and insert plug into 120-volt household electrical outlet to power unit.
Attach the cushion to most chairs for a luxurious massage as you read, rest or even work. See instructions on the use of the hand control.
The Swedish Massaging Cushion incorporates a unique strapping system which allows you to fasten it to almost any chair. Just slip the straps over the seat or chair and adjust fastening straps to secure.
Your massager won't slip or slide away.
Please note: Not recommended for use on wooden surfaces as the zipper may damage the wood. Caution is also recommended when using on upholstered furniture.
NOTE: Only gentle force should be exerted against the unit in order to eliminate any/ all risk of injury.
You may soften massage force by placing a towel between yourself and the unit.
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the unit.
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge. Never allow water or any other liquids to come into contact with the unit.
NOTE: When "POWER" button is pressed for firsttime use, the moving Swedish mechanism will automatically move to the lowest position before starting a massage program. After initial use, mechanism will always park at lowest position. See note below regarding parking.
NOTE: The moving Swedish massage mechanism always "parks" or finishes in its lowest position. It will continue to this position after the power has been turned off. If the electrical supply is interrupted, when power is restored, the mechanism will "park" or move to its lowest position.
Mail To:
HoMedics Service Center
Dept. 168, Suite 3
43155 West Nine Mile Road Novi, MI 48375
e-mail: cservice@homedics.com
1.800.466.3342
Monday - Friday
8:30am - 7:00pm (EST)
LIMITED TWO YEAR WARRANTY
To obtain warranty service on your HoMedics product, mail the product and your dated sales receipt (as proof of purchase), postpaid, to the following address:
HoMedics Service Center
Dept. 168, Suite 3
43155 West Nine Mile Road Novi, MI 48375
No COD's will be accepted.
For more information regarding our product line in the USA, please visit: www.homedics.com.
REGISTER YOUR PRODUCT AT: www.homedics.com/register
Your valuable input regarding this product will help us create the products you will want in the future.
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
TO REDUCE THE RISK OF ELECTRIC SHOCK:
TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS:
All servicing of this massager must be performed by authorized HoMedics service personnel only.
SAVE THESE INSTRUCTIONS
Please read all instructions carefully before operating.
To avoid pinching do not lean on Swedish back massage mechanism in the cushion when adjusting your body position.
Do not jam or force any part of your body in the moving massage mechanism.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the MCS-360H and is the answer not in the manual?
Questions and answers