etrailer e56UR Instruction Manual & Parts List

Hitch mount aluminum motorcycle carrier 400 lb. maximum capacity

Advertisement

Motorcycle Carrier
400 lb. Maximum Capacity
Instruction Manual
READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE
ASSEMBLING, INSTALLING, OPERATING, OR SERVICING
THIS PRODUCT. SAVE THIS MANUAL.
Copyright © 2022 by etrailer. All rights reserved. No portion of this manual or any artwork contained herein
may be reproduced in any shape or form without the express written consent of etrailer. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and maintenance may not be included.
e56UR
Hitch Mount
Aluminum
& Parts List
LIT-00473, Rev -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the e56UR and is the answer not in the manual?

Questions and answers

Summary of Contents for etrailer e56UR

  • Page 1 THIS PRODUCT. SAVE THIS MANUAL. Copyright © 2022 by etrailer. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of etrailer. Due to continuing improvements, actual product may differ slightly from the product described herein.
  • Page 2: Important Safety Information

    Carrier. Never work while the carrier makes a notation on the freight bill under the influence of alcohol, drugs of the shorted or damaged goods. Notify etrailer or medications. immediately if any hidden loss or damage is discovered after receipt.
  • Page 3 O. With Carrier attached to vehicle, never Make sure the vehicle’s engine is OFF, with exceed 55 MPH vehicle speed. Adhere to parking brake set, before loading or unloading the Carrier. Model e56UR Page 3 LIT-00473, Rev -...
  • Page 4 (23) face the rear See photo to the left. of Carrier. Align the 6 holes on the Bracket Plate on the tube (2) and the U-Bracket (35). Model e56UR Page 4 LIT-00473, Rev -...
  • Page 5 3. Remove the Ramp (20) from its storage Secure the other end of each Tie-Down to position after turning Lock Plate (12) 90 different locations on the front end of the degree to release Ramp. Main Carrier. Model e56UR Page 5 LIT-00473, Rev -...
  • Page 6: Specifications

    13. Attach the Ramp to the left side lip of Carrier Dimensions 79” Long x 8-1/2” Wide the Main Carrier, so that the motorcyle Hitch Pin 5/8” Diameter with R-Pin Safety Reflectors 2 Included Model e56UR Page 6 LIT-00473, Rev -...
  • Page 7: Parts List

    R-Pin Lock Nut M8 Bracket Spring Bolt M8*20 Press Plate Link Plae Wing Nut M10 Collar Clamp Angle Plate Knob Bolt M8*20 Bolt M8*20 U-Bracket Ramp End Plate Wing Nut M12 Mounting Plate Model e56UR Page 7 LIT-00473, Rev -...
  • Page 8: Assembly Drawing

    Some parts are listed and shown for illustration purposes only, and are not available as replacement parts. All repairs to this tool (including replacing parts should only be done by a qualified service technician. Model e56UR Page 8 LIT-00473, Rev -...

Table of Contents