PALECEK BLAINE 758700 Assembly Instructions

BLAINE DINING TABLE ASSEMBLY INSTRUCTIONS
These instructions are provided for your convenience. It is very important that they are read carefully and completely before beginning installation
of this item.(Applies to items 758700)
TOOLS NEEDED:
1. Allen Wrench (Provided).
TO ASSEMBLE:
1. Unpack contents and place on a non scratching surface like a blanket or carpeting.
2. Place Table Top (A) upside down on a non scratching surface.
3. Place Table Base (B) upside down onto Table Top (A), ensuring that the bolt holes align.
4. Insert Hex Bolt (C) through Lock Washer (F), and Flat Washer (E), then insert into perimeter Table Base (B) holes. Tighten
loosely.
5. Repeat with remainder of Hex Bolts and Washer sets (4 total). Once all bolts are inserted, tighten firmly without over tightening.
6. Turn assembled table right-side-up and place in desired location.
7. If floor is uneven, use the adjustable levelers under each leg to make contact with floor.
8. Assembly complete.
CARE:
Dust with a soft dry cloth. Do not use cleaning solutions or abrasives.
6 0 1 P A R R B O U L E V A R D , R I C H M O N D , C A 9 4 8 0 1
T . 8 0 0 . 2 7 4 . 7 7 3 0 | F . 5 1 0 . 2 3 4 . 7 2 3 4
P A L E C E K . C O M
C
D
E
F
4
4
4
Page 1