PALECEK BRODERICK 747069 Assembly Instructions

BRODERICK DINING TABLE ASSEMBLY INSTRUCTIONS
These instructions are provided for your convenience. It is very important that they are read carefully and completely before beginning installation
of this item. Assembly by 2 or more persons recommended. (Applies to items 747069, 747001, 747029, 747043)

PARTS:

1. Table top x1
2. Table base x1
3. Extension leaf x2
4. Allen Key x1
5. Allen bolt x6

TOOLS NEEDED:

1. Allen key (Included).

TO ASSEMBLE:

1. Unpack all parts and lay upon non-scratching blanket or carpet. Do not discard packaging until table is assembled.
2. Place Table top (#1) upside down on a non-scratching surface.
3. Place Table base (#2) upside down, careful to align the bolt holes between top and base.
4. Insert Allen Bolt (#5) into bolt hole, and tighten loosely by hand. Repeat with remaining Allen bolts (#5).
5. Using the Allen Key (#4), tighten each Allen bolt (#5) untill all bolts are tight.
6. Turn assembld table right side up and place in desired location.
7. To insert extension leaves, unlock all sash locks, pull open table, then place extension leaf onto table slides, ensuring the
alignment pins make contact. Close table and lock all sash locks.
8. Assembly complete.
Care:
Dust with a soft dry cloth. Wipe up spills immediately. Clean with mild soapy water on a damp cloth. Do not use cleaning solutions
or abrasives.
6 0 1 P A R R B O U L E V A R D , R I C H M O N D , C A 9 4 8 0 1
T . 8 0 0 . 2 7 4 . 7 7 3 0 | F . 5 1 0 . 2 3 4 . 7 2 3 4
P A L E C E K . C O M