Advertisement
Quick Links
TSST Kiosk
Quick Start Guide
Contents:
Section# Description
1.0
NFC cable anchoring location change
2.0
Recrimp LCD Connector & install Patch Loom
3.0
Add Key Sleeve & Decal to BNA Door Lock
BNA LED Bezel Light not illuminating –
4.0
Troubleshooting + Validating Bezel LED's
5.0
Customer LCD Screen tightening Nuts
NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173
15201-ML007 Betmakers TSST_Quick Start Guide_Rev2_ECN 6371
Telephone 03 9701 1511
www.neoproductsgroup.com
Page
3
6
14
17
24
Page 1 of 26
Advertisement
Related Manuals for NEO TSST
Summary of Contents for NEO TSST
- Page 1 TSST Kiosk Quick Start Guide Contents: Section# Description Page NFC cable anchoring location change Recrimp LCD Connector & install Patch Loom Add Key Sleeve & Decal to BNA Door Lock BNA LED Bezel Light not illuminating – Troubleshooting + Validating Bezel LED’s...
- Page 2 TSST Kiosk Part# 15201-GA0xx Component Descriptions Customer LCD Screen Swipe Card Reader Scanner Time of Flight Printer Betslip Reader Teller LCD Screen NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com...
- Page 3 TSST Kiosk – Section #1 Description: NFC cable anchoring location change Reason: Reduce slack on the NFC cable to retain neatly in position Arduino Cable TOF Sensor Cable Old anchoring location of the NFC New anchoring location of the NFC...
- Page 4 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. NFC cable anchoring location change ITEMS NEEDED TO PERFORM THIS TASK SIDE CUTTER PLIERS STOCK CODE DESCRIPTION 6-INCH-ZIP-TIES-NYLON-BLACK (CUSTOMER SUPPLY) 1.00 Unlock and open the Top Door by pushing the Button on the RH side of the Top Door.
- Page 5 Loosely install 140mm (6”) cable tie. Purchasing details: https://www.walmart.com/ip/100-PACK-6-INCH- ZIP-TIES-NYLON-BLACK-40-LBS-UV-WEATHER- RESISTANT-WIRE-CABLE/506662852 Open & close TSST Lid whilst watching the NFC Cable, to ensure that it does not route towards the Bezel Beak as shown in example. Once confirmed, tighten the cable tie. Cut cable tie waste.
- Page 6 TSST Kiosk – Section #2 Descripton: Recrimp LCD Connector & install Patch Loom Reason: Solve customer screen flickering issue Add Patch Loom Recrimp Connector NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com...
- Page 7 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom ITEMS NEEDED TO PERFORM THIS TASK MOLEX MINIFIT CRIMP TOOL SIDE CUTTERS #2 PHILLIPS HEAD SCREWDRIVER WIRE STRIPPERS STOCK CODE DESCRIPTION...
- Page 8 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom (Continued) The PC Tray in the bottom of the Kiosk. Access to the Tray is from the Teller LCD Screen side of the Kiosk.
- Page 9 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom (Continued) Disconnect the 6-Pin Molex plug from the PC Tray in area shown. Using side cutters, cut off loom as close to the 6 Pin connectors as possible.
- Page 10 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom (Continued) Place stripped cable into crimp located inside the Molex crimper to the depth shown in the diagram. Clamp fully closed and the tool will release automatically.
- Page 11 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom (Continued) Select 1x 15301-LM030 Patch Loom from packaging. Connect the 15301-LM030 Patch Loom between the new crimped 6-Pin Molex plug &...
- Page 12 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom (Continued) Prior to completing this task, validate that the connectors are installed into the correct Ports in the PC Tray.
- Page 13 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Recrimp LCD Connector & install Patch Loom (Continued) Prepare to re-install the PC Tray back into the Kiosk. Check: Ensure that the Looms do not catch on the PC Tray when sliding in.
- Page 14 TSST Kiosk – Section #3 Description: Add Key Sleeve & Decal to BNA Door Lock Reason: Ensure correct keys are used in the correct locks to avoid damage BNA Door Key Sleeve: BNA Door Lock Decal: NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com...
- Page 15 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Add Key Sleeve & Decal to BNA Door Lock ITEMS NEEDED TO PERFORM THIS TASK TOOLS NOT REQUIRED STOCK CODE DESCRIPTION 15301-IM011 KEY SLEEVE - WHITE 1.00...
- Page 16 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Add Key Sleeve & Decal to BNA Door Lock Remove the 15301-DC007 – WHITE LOCK BORDER Decal from the packaging. Peel the White Lock Border Decal from the backing paper.
- Page 17 TSST Kiosk – Section #4 Description: BNA LED Bezel Light not illuminating – Troubleshooting + Validating Bezel LED’s Reason: Ensure LED lights on BNA bezel function properly Push back into the connector. BNA LED Molex Old location of the Molex...
- Page 18 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. BNA LED Bezel Light not illuminating – Troubleshooting ITEMS NEEDED TO PERFORM THIS TASK FLAT SCREWDRIVER STOCK CODE DESCRIPTION If the lights on the BNA beak are not illuminating, complete the following steps.
- Page 19 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. BNA LED Bezel Light not illuminating – Troubleshooting (Continued) Pry the LED Bezel from the BNA Head using a small screwdriver (or similar) to disassemble it. Repeat the step on the other side of the BNA Head.
- Page 20 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. BNA LED Bezel Light not illuminating – Troubleshooting (Continued) Reassemble the LED Bezel onto the BNA Head. Check that the BNA Bezel wires are routed towards the outside of the Bezel as shown.
- Page 21 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Validating TSST Bezel LED’s Open Device Manager & confirm COM# for MEI. In this example, the MEI is COM4. Note: The COM numbers are assigned by Windows and are subject to change.
- Page 22 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Validating TSST Bezel LED’s (Continued) Select pull down menu → COM4. Select “Launch Control Panel”. EBDS Control Panel will appear as image.
- Page 23 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Validating TSST Bezel LED’s (Continued) Unit will cycle & show the following actions. The Bezel LED’s will illuminate as shown. If the Bezel LED’s do not illuminate, replace the Bezel.
- Page 24 TSST Kiosk – Section #5 Description: Customer LCD Screen tightening Nuts Reason: Ensure screen stays in desired position Correct tightening of Customer LCD Screen Nuts NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com...
- Page 25 10mm SOCKET HEAD DRIVE SOCKET & ¼” DRIVE TORQUE WRENCH STOCK CODE DESCRIPTION Remove the strapping from the TSST outer carton. Caution: The strapping is under tension and can flick when cut. Carefully lift the outer carton off the Pallet. Ensure the internal packaging is free from damage.
- Page 26 Customer LCD Screen tightening Nuts (Continued) Step 1: Open the TSST Top Lid & present the Customer Screen assembly to the TSST Main Chassis. Step 2: Position and slide the LCD Screen Mount to the TSST Main Chassis towards the LH Side, nesting the Mount into the slotted holes.
Need help?
Do you have a question about the TSST and is the answer not in the manual?
Questions and answers