Danfoss HCS6000 User Instructions page 7

H) S W
ELECTING EEKEND INTO
Week-end into week day override
To temporarily copy weekend programmes into weekdays press both L and M buttons
together and hold down for 2 seconds.
To cancel the weekend into weekday override press both L and M buttons twice.
Advice:
During weekdays, this allows weekend programmes to be temporarily be copied into the
current day. The programme reverts to normal operation at the end of the day.
I) S T
ELECTING HERMOSTAT MODE
Thermostat mode options
Programmes can be permanently overridden by selecting THERMOSTAT mode, this feature
is used if fixed temperatures are required for extended periods of operation.
1. To enter THERMOSTAT mode press both L and M buttons together and hold down for
2 seconds to enter WEEKDAY into WEEK END override.
2. Press both L and M buttons together for a second time and hold down for 2 seconds to
enter THERMOSTAT mode. The default setting is heat only.
3. Once in THERMOSTAT mode it is possible to select the required heating and cooling
temperatures and the thermostat operating mode, see below for setting details.
4. Use L or M buttons to select required heating temperature.
5. Press SELECT button to select COOL mode then use L or M buttons to select required
cooling temperature.
6. Press SELECT button twice again to return to AUTO mode. The thermostat will now
operate heating and cooling to maintain the selected temperatures.
7. Should Heat only or Cool only be required, use SELECT button to select required serv-
ice.
8. Should system OFF be required, use SELECT button to select "Off".
Caution – Frost protection is not provided in OFF mode
Advice: THERMOSTAT mode can be cancelled at any time by pressing both L and M
buttons together and holding down for 2 seconds. This will return the unit to normal
running mode.
W
EEKDAY OVERRIDE
LCD DISPLAYS
L L L L L
L L L L L
L L L L L
L L L L L
L L L L L
L L L L L
L L L L L
BUTTONS
M M M M M
and
M M M M M
and
M M M M M
and
then
SELECT
then
M M M M M
or
SELECT
then
M M M M M
or
SELECT
x 2
then
M M M M M
or
SELECT
SELECT
M M M M M
and
7