Brother DCP-T580DW Quick Setup Manual

EN
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
If you selected [[5-B] Set up from the control panel on the machine] in the printed Quick Setup
Guide included with the machine, go to [5-B].
Unpack the machine and
a
check the components
Remove the protective tape and the film covering
the machine.
NOTE
• The illustrations in this guide may not match your model
exactly, but the steps are the same for each model. The
above illustration is MFC-T930DW.
• The components may differ depending on your country.
• Save all packing materials and the box in case you need to
ship your machine.
• If you use a wired connection, you must purchase the correct
interface cable for the interface you want to use. (Supported
models only)
USB cable: Use a USB 2.0 cable (Type A/B) that is no more
than 2 metres long (included in some countries).
Ethernet (Network) cable: Use a straight-through Category
5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network (not included).
• Brother aims to reduce waste and save both raw materials
and the energy required to produce them. Read more about
our environmental work at www.brotherearth.com.
Load plain A4 paper in the
b
paper tray
Proceed to the next step according to your
model. The model name can be found on
the front of the machine.
Continue to the next column
Quick Setup Guide
DCP-T530DW / DCP-T535DW / DCP-T536DW / DCP-T580DW / DCP-T583DW
DCP-T730DW / DCP-T735DW / DCP-T780DW / DCP-T830DW / DCP-T835DW
MFC-T930DW / MFC-T935DW / MFC-T980DW
The latest manuals are available at the Brother
support website: support.brother.com/manuals
DCP-T530DW / DCP-T535DW / DCP-T536DW
DCP-T580DW / DCP-T583DW / DCP-T730DW
DCP-T735DW / DCP-T780DW
DCP-T830DW / DCP-T835DW
MFC-T930DW / MFC-T935DW / MFC-T980DW
2-A
1
D0376R001-00
UK
Version A
2-A
2-B