Brother DCP-T530DW Quick Setup Manual

EN
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
If you selected [[5-B] Set up from the control panel on the machine] in the printed Quick Setup
Guide included with the machine, go to [5-B].
Unpack the machine and
a
check the components
Remove the protective tape and the film covering
the machine.
NOTE
• The illustrations in this guide may not match your model
exactly, but the steps are the same for each model. The
above illustration is MFC-T930DW.
• The components may differ depending on your country.
• Save all packing materials and the box in case you need to
ship your machine.
• We recommend using a USB 2.0 cable (Type A/B) that is no
more than 6 feet (2 meters) long (included in some
countries).
• Use a straight-through Category 5 (or greater) twisted-pair
cable for 10BASE-T or 100BASE-TX Fast Ethernet Network
(not included). (DCP-T830DW / DCP-T835DW /
MFC-T930DW / MFC-T935DW)
Load plain Letter paper in the
b
paper tray
Proceed to the next step according to your
model. The model name can be found on
the front of the machine.
DCP-T530DW / DCP-T535DW / DCP-T536DW
DCP-T730DW / DCP-T735DW
Continue to the next column
Quick Setup Guide
DCP-T530DW / DCP-T535DW / DCP-T536DW / DCP-T730DW / DCP-T735DW
DCP-T830DW / DCP-T835DW / MFC-T930DW / MFC-T935DW
The latest manuals are available at the Brother
support website: support.brother.com/manuals
2-A

DCP-T830DW / DCP-T835DW
MFC-T930DW / MFC-T935DW
2-A
1
D030BD001-00
MEX/LTN-ENG
Version 0
2-B

2
1