Subscribe to Our Youtube Channel
Related Manuals for Sealey MW100.V3
Summary of Contents for Sealey MW100.V3
- Page 1 INSTRUCTIONS FOR Models: MW100.V3, MW130.V3 - 1 - 141003...
- Page 2 MW100.V3, MW130.V3 Models: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS.
- Page 3 Weight: ......3.6kg ....3.7kg ARC Accessory Ref: ..INV/10 (Included) ..INV/10 (Included) TIG Accessory Ref: . . .INV/TIG (Not Included) ..INV/TIG (Not Included) MW100.V3, MW130.V3 - 1 - 141003...
- Page 4 Warning! Do not allow the mask to come into contact with flame as the fumes produced are harmful. 6.2.3. Clean with soapy water, do not use solvents. MW100.V3, MW130.V3 - 1 - 141003...
- Page 5 Keep the outside of the machine clean by wiping with a soft, dry cloth. For any other service or maintenance, contact your local Sealey service agent. 11. TROUBLESHOOTING If you have a problem with the inverter, check to ensure that the following are correct: l Check that the welding current, which is controlled by the potentiometer (fig.
- Page 6 However, metallic components bonded to the workpiece will increase the risk that the operator could receive a shock by touching these metallic components and the electrode at the same time. The operator should be insulated from all such bonded metallic components. MW100.V3, MW130.V3 - 1 - 141003...
- Page 7 The construction files for these products are held by the Manufacturer and INVERTERS may be inspected, by a national authority, upon request to Jack Sealey Ltd. Models MW100.V2 & MW130.V2 73/23/EEC Low Voltage Directive 6th March 2003...
Need help?
Do you have a question about the MW100.V3 and is the answer not in the manual?
Questions and answers