Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sealey MW95
Summary of Contents for Sealey MW95
- Page 1 INSTRUCTIONS FOR: INVERTER MW95 Model: MW95 ISSUE NO.1 - 30/03/06...
-
Page 2: Safety Instructions
MW95 Model: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS. -
Page 3: Specification
DESCRIPTION The MW95 model has “constant current rectifiers” for arc welding and is controlled by a transistor bridge. The specific characteristics of the “INVERTER” system provide high speed and precise regulation, ensuring a high quality result for both stick electrode and TIG welding (DC). -
Page 4: Cable Assemblies
WARNING! Do not allow the mask to come into contact with flame as the fumes produced are harmful. 6.2.3. Clean with soapy water, do not use solvents. MW95 ISSUE NO.1 - 30/03/06... -
Page 5: Welding Procedure
Keep the outside of the machine clean by wiping with a soft, dry cloth. For any other service or maintenance, contact your local Sealey service agent. 11. TROUBLESHOOTING If you have a problem with the inverter, check to ensure that the following are correct: ... - Page 6 13.10. Screening and shielding. Selective screening and shielding of other cables and equipment in the surrounding area may alleviate problems of interference. Screening of the entire welding/cutting installation may be considered for special applications. MW95 ISSUE NO.1 - 30/03/06...
-
Page 7: Declaration Of Conformity
Manufacturer and may be inspected, by a national We, the sole importer into the UK, declare that the product listed authority, upon request to Jack Sealey Ltd. below is in conformity with the following standards and directives. Signed by Mark Sweetman...
Need help?
Do you have a question about the MW95 and is the answer not in the manual?
Questions and answers