Subscribe to Our Youtube Channel
Related Manuals for Sealey MW140A
Summary of Contents for Sealey MW140A
- Page 1 INsTRUCTIoNs FoR: INVERTERS MW140A Models: MW160A MW180A MW200A Original Language Version © Jack sealey limited MW140A MW160A MW180A MW200A Issue No1 29/01/13...
- Page 2 Model Nos: MW140A,MW160A,MW180A,MW200A Thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS.
- Page 3 For safe and easy transportation, carry handle and hanging hooks for the storage of accessory cables. supplied in tough composite carry-case including earth clamp and electrode holder. 3. SPECIFICATION Model No......MW140A ...... MW160A ......... MW180A ..... MW200A Peak Power: ......140A ......160A ........180A ......200A output: ........10 - 140A .......10 -160A ........ 10 - 180A .......10-200A duty Cycle: ....
- Page 4 7.1.3. At the finish of the weld, bring the end of the electrode backward in order to fill the weld crater and then quickly lift the electrode from the weld pool to extinguish the arc. WARNING! Hot metal such as electrode stubs and workpieces should never be handled without gloves. © Jack sealey limited Original Language Version MW140A MW160A MW180A MW200A Issue No1 29/01/13...
- Page 5 8.5. Keep the outside of the machine clean by wiping with a soft, dry cloth. For any other service or maintenance, contact your local Sealey service agent. TROUBLESHOOTING If you have a problem with the inverter, check to ensure that the following are correct: ●...
- Page 6 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to: www.sealey.co.uk, email: sales@sealey.co.uk or phone:01284 757500. Environmental Protection. WEEE Regulations.
Need help?
Do you have a question about the MW140A and is the answer not in the manual?
Questions and answers