MW140.V3 MODEL NO: Thank you for purchasing a Sealey Welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS.
ARC WELDING PROCEDURE: (Optional Arc welding accessory kit INV/16 is available your Sealey dealer.) 6.2.1. Strike the electrode tip on the workpiece as if you were striking a match.
After inspection and cleaning ensure that the cover is correctly replaced and that the fixing screws are fastened right down. l Keep the outside of the machine clean by wiping with a soft dry cloth. For any other service or maintenance, contact your local Sealey service agent.
Page 6
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode. Sole UK Distributor 01284 757500 www.sealey.co.uk Sealey Group, 01284 703534 sales@sealey.co.uk Bury St. Edmunds, Suffolk. email MW140.V3 - 1 - 220205...
Manufacturer and may be inspected, by a national We, the sole importer into the UK, declare that the product listed authority, upon request to Jack Sealey Ltd. below is in conformity with the following standards and directives. Signed by Mark Sweetman...