Sewing With The Optional Hemmer Foot - Singer 1100 Instruction Manual

Sewing with the optional hemmer foot

Stitch width dial Stitch length dial
* The hemmer foot is an optional accessory not supplied with
( models A & B ) (models A, B & C)
your machine.
For hems in fine or sheer fabrics.
Set the stitch pattern dial to " " or " ".
Change to optional hemmer foot.
Neaten the edge of the fabric. At the beginning of the hem, turn
under the edge twice by about 3 mm (1/8") and sew 4-5
Hemmer foot
stitches to secure. Pull the thread slightly towards the back.
(Optional)
Insert the needle into the fabric, raise the presser foot and
guide the fold into the scroll on the foot (1).
Gently pull the fabric edge towards you and lower the presser
foot.
Begin sewing, guiding the fabric into the scroll by holding it
upright and slightly to the left (2).
1 2
26