A S S E M B L Y O F C O M P O N E N T S - SRAM DUALDRIVE Manual

A S S E M B L Y
O F C O M P O N E N T S
A S S E M B L Y H U B
» Spoke the hub as normal.
Place spoke protector disc (1)
16
on shoulder of hub, fit
cassette (2) onto driver profile.
Screw lock nut (3) with cassette
tool (Park Tool FR-5 or SRAM Part
No. 4624 411 010), tightening
torque: 40 Nm (350 in.lbs.).
Screw shifting rod (1) into the
17
hub axle and tighten it with
0.2 Nm (1.8 in.lbs.).
» Fit wheel in frame dropouts.
Place retaining washers (2) on
17
both sides of the axle – the
serrations must bear against the
dropout.
– Version for horizontal dropouts (2):
the lug must engage in the
dropout slot.
– Version for vertical dropouts (3):
without lug.
» Tighten up axle nuts. Tightening
torque 30 – 40 Nm (266 – 350 in. lbs.).
14
16
17
3
DualDrive · December 2002
1 2
3
2
1
0,2 Nm