Homedics DEFENDER GO SAVE DF-MS100 Manual

Also See for DEFENDER GO SAVE DF-MS100:

Manual (2 pages)

Table of Contents

Contents

1 To Open GoSafe
2 To Close & Secure GoSafe
3 Cleaning
4 Specifications
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

Homedics DEFENDER GO SAVE DF-MS100 Manual

To Open GoSafe™

Twist each dial until the correct combination is shown between the two indicators.
Pull ends of locking mechanism apart and remove the tether from bag.
Place contents inside.

To Close & Secure GoSafe™

Zip GoSafe™ closed.
Fold over the flap, line up the grommets and the zipper safety ring.
Weave the cable tether through the grommets and through the zipper safety ring for added security.

RECORD AND STORE THIS COMBINATION IN A SAFE PLACE.
HoMedics will not be responsible for any lost or misplaced combinations. HoMedics is not responsible for the contents of the GoSafe™. In case of lost combination, GoSafe™ must be destroyed. For security reasons, HoMedics will not provide combinations.
Wrap the ends of the tether around a stationary item such as a bed post, fence, bar, etc...
Connect the two ends of the locking mechanism.
Rotate the numbers so your combination does not show between the indicators.
*Record combination and store in a safe place.

Cleaning

Remove all contents from GoSafe™ and wipe clean with a dry cloth.

Specifications

Model Number: DF-MS100
UPC: 031262048486

This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials, or medication should not be stored in this unit.