HoMedics Defender Gosafe DF-MS100 Manual

To Open GoSafe™ :
1. Twist each dial until the correct combination is shown
between the two indicators.
2. Pull ends of locking mechanism apart and remove the
tether from bag.
3. Place contents inside.
To Close & Secure GoSafe™ :
1. Zip GoSafe™ closed.
2. Fold over the flap, line up the grommets and the
zipper safety ring.
indicators
3. Weave the cable tether through the grommets and
through the zipper safety ring for added security.
**IMPORTANT: RECORD AND STORE THIS
COMBINATION IN A SAFE PLACE.**
HoMedics will not be responsible for any lost or misplaced
combinations. HoMedics is not responsible for the contents
of the GoSafe™. In case of lost combination, GoSafe™ must
be destroyed. For security reasons, HoMedics will not
zipper
flap
safety
ring
grommets
provide combinations.
4. Wrap the ends of the tether around a stationary item
such as a bed post, fence, bar, etc...
5. Connect the two ends of the locking mechanism.
6. Rotate the numbers so your combination does not
show between the indicators.
*Record combination and store in a safe place.
Cleaning
Remove all contents from GoSafe™ and wipe clean with a
dry cloth.