HoMedics DS-CHAIR Assembly Instructions

Note: Massage Cushion is not included. Follow your buyer's direction in pulling a
unit from stock for display. Please see a list of corresponding massage cushions &
display headers on next page (see step 3 on page 2).
A. Support Bar
B. Seat Cushion
C. Seat Back
D. Screw (Ф1/4"x 11/4") 8
E. Screw (Ф1/4"x 1")
I
A
C
G
IB-DSCHAIR

Assembly Instructions for Display Chair

Model # DS-CHAIR
1
1
1
2
B
D
E
J
F

Parts List

F. Bucket
G. Outlet
H. Allen Wrench
I. Chair Arms
J. Nut

Step 1. Set up the chair

1) Attach Support Bar (A) between Chair Arms (I)
with 2 Screws (D)
2) Attach Seat Cushion (B) to Chair Arms (I) with
4 Screws (D)
3) Attach Seat Back (C) to Chair Arms (I) with 2
Screws (D) as shown
4) Attach Seat Back (C) to Seat Cushion (B) with
2 Screws (E) as shown
5) Attach Outlet (G) by sliding metal plate down
over mounting screws in right chair leg and
fitting Nut (J) over the screw to secure

Step 2. Set up the bucket

• Attach Bucket (F) to either armrest of your
HoMedics display chair
Be sure that all the screws are fully tightened
before using.
Display Chair Model # DS-CHAIR
1
1
1
2 (L and R)
1
Page 1